Resuscitation and Emergency
42Pages

{{requestButtons}}

Catalog excerpts

Resuscitation and Emergency - 3

REANIVAC I and II Resuscitation case Ref.: 09RNVU0000/09RNVD0000 The REANIVAC emergency equipments have been especially designed to be extraordinarily flexible, autonomous and easy-to-use. REANIVAC I allows: • Oxygen inhalation for recovering patients or to transfer reanimated patients. • Oxygen enrichment of the manual resuscitator. REANIVAC II also allows: • Venturi-effect inhalations through the use of an oxygen bottle as negative pressure source. • Double fold polyethylene case with 540x410x155 mm dimensions. It has an interior pocket with a 2,25 l capacity, accessible from two...

Open the catalog to page 3
Resuscitation and Emergency - 4

REANIVAC I and II Resuscitation backpack Ref.: 09MCRU0000/09MCRU3000/09MCRD0000/09MCRD3000 The REANIVAC emergency equipments have been especially designed to be extraordinarily flexible, autonomous and easy-to-use. REANIVAC I allows: • Oxygen inhalation for recovering patients or to transfer reanimated. • Oxygen enrichment of the manual resuscitator. • Backpack version available, which allows free-hand transport in emergency situations. REANIVAC II also allows: • Venturi-effect inhalations through the use of an oxygen bottle as negative pressure source. REANIVAC I is composed by: • Backpack...

Open the catalog to page 4
Resuscitation and Emergency - 5

Resuscitator UNIVEN Resuscitator with/without transport bag and sterilizables Ref.: 09UACB0000/09UASB0000/09RARC0000/09RIRC0000/09RNRC0000 The UNIVEN manual resuscitator has been conceived to provide assistance during artificial resuscitation and cardiopulmonary reanimation. • Connected to an oxygen source, UNIVEN can also supply additional oxygen with the help of the reservoir. The oxygen concentration supplied by UNIVEN depends on the flow of oxygen and on the volume of ejected air, as well as the frequency of the ventilation and the technical expertise of the operator. • UNIVEN is...

Open the catalog to page 5
Resuscitation and Emergency - 6

MASKS Mouth to mouth mask / silicone / rubber / average concentration Ref.: 09MSBB0000/09MSCRa000/09MSCRaG00/09MSCTaM00 Mouth to mouth mask: it offers great protection thanks to its unidirectional valve and its filter, as well as a good seal with an air cushion. Silicone mask: mask with a transparent body and a perimeter cushion for use during anaesthesia, mechanical ventilation or resuscitation. It supplies the patient in safe and comfortable conditions. Rubber mask: mask with a transparent body and a blue perimeter cushion for use during anaesthesia, mechanical ventilation or...

Open the catalog to page 6
Resuscitation and Emergency - 7

REGULATORS Regulator for REANIVAC I and REANIVAC II Ref.: 11MOBX0115 / 11MRBX0115 The Regulator for REANIVAC is a compact oxygen regulator that incorporates a dial flowmeter. It can be connected to all of the officially approved cylinder sizes and it integrates a pressure gauge for pressure measurements. REANIVAC II version incorporates a Venturi-effect vacuum system attached to a collector jar. TECHNICAL SPECIFICATIONS Regulator for REANIVAC I: • In compliance with UNE-EN ISO 10524-1 and UNE-EN ISO 15002 standards. • Precision: o ± 30% from 0 to 1,5 l/min. o ± 20% above 1,5 l/min. o...

Open the catalog to page 7
Resuscitation and Emergency - 8

PEEP VALVE 18/22 for adults / children Ref.: 09PEEPA018/09PEEPI018 PEEP valves are designed to complement manual resuscitators, facilitating continuous pressure regulation. • PEEP valve for adults can be set between 5 and 20 cmH2O. • PEEP valve for children can be set between 1 and 10 cmH2O. According to the Guidelines and Recommendations for Resuscitation 2015, the use of a PEEP to facilitate continuous pressure regulation is recommended in adults and especially in neonates: "All term or preterm infants who remain in apnea despite initial measures should receive positive pressure...

Open the catalog to page 8
Resuscitation and Emergency - 9

The on-demand valve has been designed for the patient-controlled administration of 100% oxygen. It is specially designed for emergency services. In addition, it has a manual ventilation button located on the front of the device, which helps keep the patient's airway open. The on-demand valve is designed to oppose very little resistance to flow, which in turn means less effort for the patient to breathe. TECHNICAL SPECIFICATIONS • Manual flow: 40,0 l/min. • Flow under inhalation demand: 0 - 160 l/min. • Pressure releasing valve: 60 cm H2O with 60 l/min. • Resistance to exhalation: -6...

Open the catalog to page 9
Resuscitation and Emergency - 10

RESUSCITATION ACCESSORIES Thermic blanket / Guedell Airways / Jaw spreader / Extension lead / Tongue clamp Ref.: 09MTRM0000/09TUGUa000/09ABHL0000/09ALRG0002 / 09PITL0000 • Thermic blanket for protection against cold, heat and humidity. Presented individually in a transparent plastic bag with instructions for use. • Guedel airways, airway tubes easily identifiable through colour codes. • Helicoidal jaw spreader to allow the opening of air ways. • 2m long extension lead, which facilitates an oxygen flow from a flowmeter to a manual resuscitator. • Tongue clamp, to avoid patients from...

Open the catalog to page 10
Resuscitation and Emergency - 11

The Stackable emergency stretcher is a light and rigid platform used to carry the wounded and the ill from inaccessible places to field hospitals or emergency vehicles, in order to be taken care of in a suitable environment.  It can be adapted as a stretcher for field hospitalization using one of the stands available in our catalogue. Being stackable, they require shorter volumes for storage and transportation. TECHNICAL SPECIFICATIONS Metallic enclosure structure with dimensions 1,87 x 0,50 m. It incorporates a taut canvas attached to the enclosure structure. The different parts that form...

Open the catalog to page 11
Resuscitation and Emergency - 12

DOUBLE FOLD STRETCHER Ref.: 14CDEP0000 The Double fold stretcher is a light and rigid platform used to carry the wounded and the ill from inaccessible places to field hospitals or emergency vehicles, in order to be taken care of in a suitable environment.  Given its short dimensions once folded in its cover, it is specially indicated both for places with short room available, and for public places where it may be seldom used. TECHNICAL SPECIFICATIONS Composed by a metallic articulated enclosure of 2,02 x 0,54 m dimension with four lower legs of 13 cm, handles on the edges and a canvas...

Open the catalog to page 12

All Ingeniería y Técnicas Clínicas catalogs and technical brochures

  1. Rail Systems

    49 Pages

  2. 11MRBX81S4

    1 Pages

  3. 09MTRM0000

    1 Pages

  4. 11MOBX81S4

    1 Pages

  5. 09MCRU0000

    2 Pages

  6. REANIVAC I

    1 Pages

  7. 13ACCS2C00

    1 Pages