• Simultaneous 12-lead ECG measurement and monitoring.
• 3/6/12-channel thermal printing with 112mm width.
• Touchscreen display with foil keys and alphanumeric keyboard for patient data input.
• 8-hour battery operation with 2-hour charging time.
• Built-in power supply and 150 recordings storage capacity.
• Diagnosis, rhythm analysis, and rhythm event printing programs.
• USB or WiFi connection to PC.

• Automatic and manual lead selection.
• Programmable recording modes and automatic ECG curve positioning.
• Economic printing mode and quick paper change.
• Exercise ECG option and connection to hospital information systems.
• Cardiological data management software on PC and storage of last 20 patient data.

The HeartScreen 112C-1 is an ergonomic, touch-controlled ECG device with a clear, easy-to-use interface. It features a 3-level menu system, hotkeys, and a multi-language touch keyboard for patient data input. The device offers noise-free operation and high-resolution 12-channel recording, displaying and printing up to 12 leads simultaneously.

The device includes two programs for analyzing and evaluating ECG recordings. The analysis program determines amplitude and time parameters, while the diagnosis program recommends diagnoses based on approximately 100 diagnostic categories.

Recordings can be made with various pre-set lengths from 12 ECG leads. Rhythm recordings up to 10 minutes can be stored, and rhythm analysis can be performed. The event print program detects and prints abnormal signals.

With a high-capacity battery, the device supports 8 hours of continuous operation in monitoring mode and over 30 minutes of printing with a single charge.

The device can connect to the Innobase cardiological database management program and the optional CardioPC exercise program for further evaluation and archiving of recordings.

• Dimensions: 295 x 225 x 82 mm, Weight: 1.9 kg.
• Mains voltage: 110-240V 50/60Hz, Battery type: NiMH, 8 pcs AA cells.
• ECG amplifier sampling: 8 kHz channel/24 bit, Pacemaker detection: 2-700mV/0.5-2ms.
• Filters: Baseline 0.05, Muscle 35, Noise 50/60Hz.
• Patient cable: Defibrillator protected 10-lead, Sensitivity: 2.5, 5, 10, 20mm/mV.
• Paper speed: 5, 10, 25, 50mm/sec, Printing paper: Heat-sensitive 112 mm wide.
• Display: TFT, 640 x 480 pixel, 5.7” touchscreen.
• PC connection: Isolated USB, WiFi option.
• Standards: EN60601-1-1 3rd edition, EN60601-1-2, EN60601-2-25.
• Operating temperature: +10 to +40°C, Storage temperature: -20 to +55°C.

• 10-lead defibrillator protected ECG cable, 4 limb ECG electrodes, 6 chest ECG electrodes.
• 1 pack Z-fold printing paper, 1 bottle ECG gel, Carrying bag.

• Innobase data management software, USB cable, WiFi.

The device is manufactured according to the 93/42/EEC Medical Directives. Innomed Medical Developing and Manufacturing Inc. reserves the right for modification.