Catalogs >
INOXPA >
DCH+

DCH+
1 / 3Pages

Catalog excerpts

FT 01.532.33.01EN · (0) 2024/04 pàg. 1/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com. DCH+ Twin Screw Pump A P P L I C AT I O N The DCH+ is a twin screw pump, with hygienic design, suitable for use in the dairy, food and beverage, cosmetics, etc. The flow is uniform and in an axial direction, so there are no changes of volume or physical properties of the product. Therefore it is an ideal pump for handling shear-sensitive fluids. It has a high suction lift capability with very low NPSH values. It is capable of pumping liquids with high viscosity, but also with low viscosity, so it can be used as a CIP-supply pump. The design ensures a fully cleanability and drainability. D E S I G N A N D F E AT U R E S The DCH+ pumps are available in bare shaft construction and designed according to the EHEDG recommendations. They are built with a sturdy design, ensuring durability, quiet operation, and minimal pulsation during pumping. The mechanical seals have a hygienic design. T E C H N I C A L S P E C I F I C AT I O N S Materials Parts in contact with the product Gear casing Gaskets 1.4404 (AISI 316L) Stainless steel EPDM Mechanical seal Rotary part Stationary part silicon carbide (SiC) silicon carbide (SiC) Surface finish Internal External

Open the catalog to page 1

Operating limits Maximum flow Maximum differential pressure Maximum working pressure Temperature range (EPDM) SIP Maximum speed Pump pàg. 2/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com. MOTOR Motor or gear motor with B3 legs, in compliance with the IEC standards, Efficiency class according to EC regulation, IP 55 protection and F-class insulation. 3 phases, 50 Hz, 230 V Δ / 400 V Υ, ≤ 4 kW 3 phases, 50 Hz, 400 V Δ / 690 V Υ,...

Open the catalog to page 2

DIMENSIONS pag. 3/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com.

Open the catalog to page 3

DCH+ 1 / 3Pages

Catalog excerpts

All INOXPA catalogs and technical brochures

DCH+
1 / 3Pages