FTsolMV_EN - 2023/04 page. 1/5 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our web site. www.inoxpa.com MV V-Type Solids Blender A P P L I C AT I O N The V-type blender is used to produce homogeneous solid-solid mixture. Mixing is a common process step in the manufacture of products for industries such as food, cosmetics, pharmaceutical, chemical, detergents, fertilizers and plastics. Examples of materials or substances mixed in this way include pharmaceuticals, flour for confectionery, fish meal, refined or white flour, whole wheat flour, flour for coating, dextrins, enzymes, coffee, cocoa, milk powder, chocolate, gelatine, crème caramel and dessert powder, baby food, custard powder, starches, seeds, pigments, colorants, cosmetics, powdered or granulated plastics, fiberglass, etc. P R I N C I P L E O F O P E R AT I O N The unit consists of two cylinders arranged in a “V” shape with an angle of 80°. A manually actuated inspection and loading port is provided at the end of each cylinder, allowing access to its interior. The product outlet is located at the point where the two cylinders are joined and is fitted with a manually or automatically actuated butterfly valve. The geared motor and the bearing system are located within the lateral supports holding the blender body. The solids are introduced into the blender through the loading aperture. The mixing performance is of 50%, that is, with each turn of the blender, the product located in the two cylinders moves into the central common section, and this is repeated continuously. The speed is not high, which makes this unit especially suitable for products that need to be maintained cold. The mixture is discharged through a hermetically closing butterfly valve which can be operated manually or automatically. The unit is provided with a guard rail with electrical safety to prevent the operator from accessing it when in operation. If anyone should gain access to the unit, for safety reasons, the operation will cease.

D E S I G N A N D F E AT U R E S The series consists of 10 models with a total capacity of 50 to 4200 litres and a useful capacity of 50% of the total. Mixing times vary between 3 and 15 minutes depending on the mixture. The actual mixing is thorough and fast. The unit is ideal for sensitive mixtures. The apertures are sealed hermetically in order to avoid contamination from the outside during the mixing process. The interior of the unit is especially designed to prevent the formation of dead spaces and facilitates gravity discharge. page. 2/5 The information is for guidance only. We reserve...

OPTIONS This unit allows the incorporation of a liquid spray system to introduce liquids in spray form during the process. The injector is connected to the spray nozzles by means of a rotary system and is fed with additives from a pressurized tank or by means of a variable speed displacement pump at constant pressure. The automatic stop positions are: loading, discharging, and sampling. Before stopping at one of these three positions, the system performs a cycle which slows down the mixer in order to reach the stopping position with the highest possible accuracy and remains halted at that point....

Total Volume (litres) Useful Volume (litres) page. 4/5 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our web site. www.inoxpa.com GENERAL DIMENSIONS * Geared motor OPTIONS Vacuum loading system Raw materials to mix Vacuum skid with filter Load cells

OPTIONS Vacuum discharge system page. 5/5 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our web site. www.inoxpa.com Ready product Vacuum skid with filter Load cells Liquids injection system Loading and/or discharge system by gravity, with hermetic retractable bellows Discharge valve Double-acting pneumatically actuated cylinders Porous hose Stand-by mode Activated mode for loading/discharge