Catalogs >
INOXPA >
Prolac HCP SP

Prolac HCP SP
1 / 4Pages

Catalog excerpts

Centrifugal Pump I Application Due to the choice of materials and its design, PROLAC HCP SP (Self-Priming) is suitable for applications requiring a high level of hygiene, gentle handling of the product and resistance to chemical attack. The HCP SP pump is particularly suitable for pumping liquids containing air or gas without losing its pumping capacity. It can be used in the food-processing, pharmaceutical and chemical industries. Its main application is the return of the CIP cleaning system. I Operating principle The PROLAC HCP SP is a self-priming pump that eliminates the need for a vacuum pump or other devices such as foot valves or additional pipes. The pump needs to be primed with liquid only once before start up. When the pump is turned on, it sucks the air or gas present in the suction pipe, mixing it with the liquid in the pump body. The centrifugal forces push the mixture of liquid and gas towards the separator tank where it loses speed. Because of gravity, the liquid remains at the bottom of the separator tank and is driven back to the pump body through the return pipe, while the air or gas is released through the discharge pipe. In this way, the air or gas is continuously being removed from the suction pipe until the liquid reaches the pump body and the pump begins to operate like a normal centrifugal pump. It is very important the sucked air is released through the discharge pipe without any back pressure. It is not advisable to reduce the hydraulic performance of the pump by resizing the impeller or lowering the speed by means of a frequency converter, since it will have negative repercussions on the pump's suction capacity. Operating principle I Design and features The PROLAC HCP SP has the same components as the PROLAC HCP. The key difference between the two pumps is the body. The impeller, seal and all the other parts are the same in both pumps. The body of the PROLAC HCP SP includes a separator tank and a non-return valve, ensuring high levels of efficiency. The motor complies with the IEC standards and is protected by a stainless steel shroud and provided with height adjustable stainless steel legs of hygienic design.

Open the catalog to page 1

Centrifugal Pump I Technical specifications Materials Parts in contact with the product Other steel parts Gaskets in contact with the product Stainless steel 1.4404 (AISI 316L) Stainless steel 1.4301 (AISI 304) EPDM Mechanical seal Rotary part Stationary part Gaskets Silicon carbide (SiC) Carbon (C) EPDM Surface finish External Internal Matt Bright polish Ra < 0,8 μm Connections DIN 11851 (standard) CLAMP OD SMS 1145 (other connections available on request) Operating limits Nominal pressure Temperature range Maximum flow Maximum differential head Maximum speed I Motor Triphasic induction...

Open the catalog to page 2

The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our web site. www.inoxpa.com

Open the catalog to page 3

Centrifugal Pump Caudal / Flow Caudal / Flow The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our web site. www.inoxpa.com

Open the catalog to page 4

Prolac HCP SP 1 / 4Pages

Catalog excerpts

All INOXPA catalogs and technical brochures

Prolac HCP SP
1 / 4Pages