FT 01.520.33.01EN (0) 2022/05 pàg. 1/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com TLS Close-coupled Rotary Lobe Pump A P P L I C AT I O N The TLS pump is a positive displacement rotary lobe pump designed according to the sanitary requirements. The pump has a reduced size and it is highly efficient and reliable. This pump is ideal for managing all kinds of fluid, of either low or high viscosity, in the food-processing, dairy and cosmetic industries as well as for filtering and bottling applications. Products containing fragile solids such as junket can be pumped without damage thanks to the specially designed lobes. D E S I G N A N D F E AT U R E S The TLS pump is a monoblock pump that can be adapted to any gear motor with a B5 flange. The pump basically consists of a stainless steel pump housing and cover manufactured by investment casting, two tri-lobe rotors with a sanitary design attachment. Moreover, the pump is provided with height adjustable stainless steel legs of hygienic design. The rotary lobe pump is provided with a C/SiC/EPDM external single mechanical seal. The seal is balanced and has a sanitary design. If an application requires it, other seal materials can be used. T E C H N I C A L S P E C I F I C AT I O N S Materials Parts in contact with the product Other stainless steel parts Support and lantern Gaskets in contact with the product Mechanical seal Rotary part Stationary part Gaskets silicon carbide (SiC) carbon (C) EPDM Surface finish: Internal External bright polish, Ra ≤ 0,8 µm matt

Operating limits: Nominal pressure Temperature range (EPDM) Velocidad Presion Volumen por DN maxima maxima revolucion pag. 2/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com MOTOR AND GEAR UNIT Helical gear unit with B5 flange in compliance with the IEC standards and triphasic induction motor 4 poles = 1500/1750 rpm, efficiency class according to EC regulation, IP 55 protection and F-class insulation. OPTIONS Pump casing with drain...

DIMENSIONS Pump pag. 3/3 The information is for guidance only. We reserve the right to modify any material or feature without notice in advance. Photos are not binding. For further information, please, consult our website www.inoxpa.com Pump Gear unit kW DN A B C E F G H I J kg