Ambulance Systems
14Pages

{{requestButtons}}

Catalog excerpts

Ambulance Systems - 2

AMBULANCE SYSTEMS

Open the catalog to page 2
Ambulance Systems - 3

AMBULANCE SYSTEMS Made of S/S material Frame, bras body material Oxygen material BS 5682 / DIN 13260-2 / Afnor NF 90 -116 Outles and bard end inlet Under Plaster Model Cylinder Switch Knob Hose outlet or Pneumatic outlet Ambulance Oxygen Terminal Unit • • • Made of 304 quality S/S material Several length and outlet standard alternatives Modular system fully adaptable to your needs for the most demanding emergency situations Quick coupling for any type of hose Gas cylinder selector Outlet pressure monometer • • • • Hose outlet Model Pneumatic outlet Model

Open the catalog to page 3
Ambulance Systems - 4

Oxygen Pressure Regulators • Designed to be used up to 200 bar, optimizing the O2 consumption Guaranteeing a high-stability of the outlet pressure and precise flows Safe and accurate over-pressure valve Cylinder Fitting Hose outlet Pneumatic outlet Hose outlet Pneumatic outlet Hose outlet Wiht sensor Pneumatic outlet Wiht sensor Hose outlet Wiht sensor Pneumatic outlet Hose outlet Pneumatic outlet Wiht sensor Aluminium Cylinder DIN Type • • • Aluminium alloy high pressure cylinders for medical gases 5 L and 10 L capacity cylinders tested at 300 bar The aluminium alloy medical gas cylinders...

Open the catalog to page 4
Ambulance Systems - 5

AMBULANCE SYSTEMS Inspital offers different models of flowmeters according to their gas flow scale, connection types and humidity jars that can be used with oxygen Flowmeters can be either connected to medical gas outlets directly or attached on rail system and connected to the outlets by flexible hoses Size (LxWxH) Inlet Pressure Flow Rate Humidifier capacity Oxygen Flowmeters 80 x 48 x 145 mm Whitworth GAS 1/8” 4.2 Kgs/cm² – 60 psi – 414 kPa 0 - 15 L/min 200 ml Without Adaptor Wall type Rail type

Open the catalog to page 5
Ambulance Systems - 6

Venturi Vacuum Regulator • • • • • Designed to provide an adjustable high-vacuum from compressed air or oxygen supply Chrome coated brass trunk Avaliable in BS, DIN, AFNOR Max Suction Flow : 25L/min at -775 mbar Gas consumption at max suction : 60 L/min Without Adaptor Ambulance Type O2 Alarm Panels • • • • Designed to be used in O2 gas cylinder systems Audible and visual alarms in case of pressure problems The panel works with two high pressure switches and one positive pressure sensor to detect pressure changes Sensors and switches are not included

Open the catalog to page 6
Ambulance Systems - 7

AMBULANCE SYSTEMS Probes Inspital probes are used to supply necessary gases from terminal units to the patient or medical equipments via hose connections or by direct connection to the equipment. Inspital Probes are manufactured in compliance with BS 5682:1992, DIN 13260, AFNOR NF S 90-116. • • • • • Manufactured according to BS, DIN & AFNOR standard Special connections for O2, AIR, VACUUM Special labeling for each gas type Safe hose connection Made of chrome plated brass material Hose outlet Pneumatic outlet Canister / Liner Model No AT20.01 Portable Suction Units Jar 2 L Suitable for high...

Open the catalog to page 7
Ambulance Systems - 8

Rail Attachment Explanation For 25 x 5 mm Rail Wall Attachment Explanation Wall Attachment Explanation 8 x 14 mm (silicone) 6 x 11 mm (silicone) 8 x 12 mm (PVC) 10 x 14 mm (PVC) Explanation Control Connector Explanation Non-Sterile Explanation Non-Sterile Explanation 1,8 Meter Hose Suction Cannula Tip Suction Cannula, Plastic Kapkon Connector Tube Connector Explanation Cathater Jar, Holder Cathater Jar Vacuum Control Connector Yankauer Tipped Hose Rail Bolt Plastic Interconnect Nuts Explanation Kapkon Connector

Open the catalog to page 8
Ambulance Systems - 9

AMBULANCE SYSTEMS Oxygen Therapy Device Oxygen Therapy Device is appropriate to use in hospitals, emergency services and homecare units. This device is designed to adjust and control the oxygen flow. • • • • • • • Chrome plated brass trunk High resistant polycarbonate humidifier bottle suitable for sterilization Maximum Gas Supply Pressure : 200 bar Regulator Outlet Pressure : 3.5 - 4 bar Adjustable Flow : 0 - 15 L/min Pressure Gauge Range : 0 - 315 bar Sterilization Method : 121 °C Bull Nose Model No Oxygen Therapy Device Calibrated • • • • • • • Max. gas supply pressure Regulator Outlet...

Open the catalog to page 9
Ambulance Systems - 10

Oxygen Therapy Device Inspital Oxygen Therapy Device is appropriate to use in hospitals, emergency services and homecare units. This device is designed to adjust and control the oxygen flow. • • Chrome plated brass trunk High resistant polycarbonate humidifier bottle suitable for sterilization Maximum gas supply pressure : 200 bar Regulator Outlet Pressure : 3.5 - 4 bar Adjustable Flow : 0 - 15 L/min Inlet Pressure Gauge Range : 0 - 315 bar Bull Nose Model No Ventilator Regulators Design to use with ventilator and direct oxygen supply at emergency, ICU and ambulances. • • • Maximum gas...

Open the catalog to page 10
Ambulance Systems - 11

AMBULANCE SYSTEMS Portable Suction Units • • • Designed to be used in small operations and first aids Portable design suitable for rapid interventions Battery system for 30 minutes continuous run Mobile, with battery 12 V Silicone Hose On / Off Button Liquid Collection Jars Vacuum Gauge Vacuum Level Adjustment Knob Locking Clip

Open the catalog to page 11
Ambulance Systems - 12

Stretcher Support System RP10.02 Stretcher Support System is designed to use in ambulances for convenient loading & unloading of the stretchers. • • • • • • S/S tray 250 kgs maximum loading capacity Folding ramp supported by gas springs Universal type stretcher fixing port 140 mm sideway movement to each direction Support system weight 45 kgs

Open the catalog to page 12
Ambulance Systems - 13

AMBULANCE SYSTEMS Strether Support System RP10.01 Stretcher Support System is designed to meet all movement requirements of ambulance usage. System has manual height adjustment, sideway movement and tilt function • S/S tray • 250 kgs maximum loading capacity • Height adjustment and sideway movement by lever • Tilt function for easier loading • Extractable stretcher tray • Foldable ramp • Stretcher fixing system • Support system weight 95 kgs Model: RP10.01

Open the catalog to page 13

All Inspital Medical Technology catalogs and technical brochures