Operating Room Modular Equipments
14Pages

{{requestButtons}}

Catalog excerpts

Operating Room Modular Equipments - 2

WALL SYSTEM Wall System DESIGN The partition wall system design facilitates the dismantling of any individual panel, to provide easy access for later installations, alterations or repair work. SURFACES The panels are installed to the wall on substructure made of galvanized steel. All internal corner wall panels are curved and easy to clean. Special silicone gaskets is used as a sealing between panels, frames, windows. Panels can be powder coated according to RAL palette, optionally with antibacterial paint. TECHNICAL DATA Heat resistance: double-layered wall panel: 1,75 m2*K/W...

Open the catalog to page 2
Operating Room Modular Equipments - 3

METAL Stainless steel (grade AISI 304 or 316),polished or powder coated. Galvanized steel, powder coated. Glass fixed on steel frame, available with decorative photos.

Open the catalog to page 3
Operating Room Modular Equipments - 4

WALL SYSTEM GLASS Wall panels made of stainless steel faced with prestressed glass, resistant to impact, are not only practical but also very trendy. First of all, sheets with interesting graphics will provide You with original visual effects- the ready-made designs or photographs can be used.

Open the catalog to page 4
Operating Room Modular Equipments - 5

SUBSTRUCTURE The substructure of the INSPITAL wall system facing formwork is fitted in front of the brickwork as a non-load-bearing interior wall. Fitting is carried out using vertical profile supports which are screwed to the floor rails at the distance of the grid or according to the outline drawing.

Open the catalog to page 5
Operating Room Modular Equipments - 6

HERMETIC DOORS HERMETIC DOORS The hermetic medical doors are made of stainless steel with brushed surface or epoxy coated. The door leaves are filled with highly-compressed polyurethane foam, providing thermal and acoustic insulation at the same time, assuring light weight and rigidity of the leaf. The doors are tailored to individual customer’s requirements: the dimensions, different shapes and sizes of vision windows, door handles, door frames, optional use of automatics supplied by renowned manufacturers with different activation options.

Open the catalog to page 6
Operating Room Modular Equipments - 7

SLIDING DOORS SPECIFICATION The door moves horizontally. When the door is nearly closed, the automation manages its lowering and translation motion towards the wall and the floor, thereby guaranteeing an hermetic seal by means of the compression of special rubber gaskets on all four sides of the door. The support trolleys can bear and convey a maximum load of 150 kg. The automation is equipped with a special software to separately and independently manage the lowering and translation phases during opening and closing of the door, controlling power and speed. HINGED DOORS SPECIFICATION The...

Open the catalog to page 7
Operating Room Modular Equipments - 8

LAMINAR FLOW UNITS LAMINAR FLOW UNITS The Laminar Flow Units for operation rooms are used for providing the required laminar flow above the operation desk and to prevent bacteria and other particles entering in the patient zone. The unit is entirely made of AISI 304 stainless steel. H13/H14 HEPA filters are used in the unit for filtration.

Open the catalog to page 8
Operating Room Modular Equipments - 9

HEPA FILTER BOXES Stainless steel or pointed DKP steel. Standard supply diffuser is perforated sheet. F-HB is used to install HEPA filter and to provide hygienic conditions for duct system. It is hanged to ceilings by rods.

Open the catalog to page 9
Operating Room Modular Equipments - 10

OPERATING ROOM CONTROL PANEL OPERATING ROOM CONTROL PANEL Touch screen operating room control panel offers comfort for medical personel in order to operate in operating room and also enable to control environment conditions and medical devices. Surgical team can control medical devices easily and communicate with other rooms by using hands-free phone with high voice quality. Operating room panel consist of one smart electronic card and one touch screen Android operating system.

Open the catalog to page 10
Operating Room Modular Equipments - 11

MEDICAL ISOLATED POWER PANELS WITH TRANSFER UNIT AND FAULT DETECTİON SYSTEM Medical isolated power panels with transfer unit and insulation fault detection device have also test signal generator, insulation fault evaluators and toroidal transformer in apart from other isolated panels. When any fault exist, this fault is detected by insulation monitoring device and test signal generator produce a test signal, after that fault detected according to response of system to this signal. Insulation fault evaluator send signal to alarm monitoring devices.

Open the catalog to page 11
Operating Room Modular Equipments - 12

STANINLESS STEEL HOSPITAL FURNITURE STANINLESS STEEL HOSPITAL FURNITURE The modular furniture system & stainless steel equipments by INSPITAL offers various types of high cabinets, low cabinets, suspended cabinetry, cabinetry extensions, tables and tables with embedded sinks. From this wide range of products our customers are able to design interiors for many purposes, choosing specifications as detailed as the number of shelves and drawers according to individual needs. Furnishings are made from durable, grade AISI 304 stainless steel or powder-coated sheet steel, painted from one of the...

Open the catalog to page 12

All Inspital Medical Technology catalogs and technical brochures