Straumann® BLX Implant System INTERNATIONAL EDITION

Information and Index Index Bone Level BLX RB/WB

When searching the "Implants" chapter, first select the type of implant – BLX Regular Base (RB) or BLX Wide Base (WB). Then specify the desired implant diameter. These are marked by colored rectangles on the side tabs of each page. Instruments and accessories can be found in the corresponding chapter. Straumann® BLX: Confidence beyond Immediacy The Straumann® BLX Implant System is the next generation solution for confidence beyond immediacy. Straumann® BLX has been designed for immediacy, and is also suitable for all other treatment protocols – ranging from immediate to conventional placement...

Implants and Closure Caps 9 Implants and Closure Caps 10

BLX Implants Regular Base (RB) Implants

BLX Implants Regular Base (RB) Implants and Closure Caps Closure Caps RB Closure Cap jjto 0,4 mm Ti 064.4100S

BLX Implants Wide Base (WB) Implants and Closure Caps Closure Caps WB Closure Cap

When searching for prosthetic components, first specify between Regular Base (RB) and Wide Base (WB) implants. RB/WB abutments fit both RB and WB implants. WB abutments only fit WB implants. In this section, you will find prosthetics components, ranging from single crown to hybrid restoration. Instruments and accessories can be found in the "Instruments and Accessories" chapter. More than just highest precision: a perfectly adjusted system Straumann offers a wide variety of implant-borne prosthetic solutions for all indications – ranging from single tooth restorations to edentulous solutions....

Bone Level BLX RB/WB 15 Impression-taking/Master Cast Fabrication 16 Impression-taking/Master Cast Fabrication 28

Bone Level BLX RB/WB

Impression Posts Product Impression Posts and Analog RB Impression Post Open Tray RB Impression Post Closed Tray short, with guide screw, length 16.5 mm long, with guide screw, length 24 mm with guide screw, length 13 mm Digital Impression Product Digital Impression RB/WB CARES® Mono Scanbody RB Repositionable Implant Analog O- / 3.8 mm, height 10 mm for fully digital workflow, length 17 mm PEEK/TAN Stainless steel Analogs Product Analogs RB Implant Analog jSJBB length 12 mm TAN 065.0021

Bone Level BLX RB/WB RB/WB Prosthetic Healing Abutments RB Healing Abutments Product Crown, ∅ 4 mm, gingiva height 1.5 mm, abutment height 2 mm, for final abutments ∅ 3.8 mm Healing Abutments Crown, ∅ 4 mm, gingiva height 1.5 mm, abutment height 4 mm, for final abutments ∅ 3.8 mm Crown, ∅ 4 mm, gingiva height 2.5 mm, abutment height 2 mm, for final abutments ∅ 3.8 mm Crown, ∅ 4 mm, gingiva height 2.5 mm, abutment height 4 mm, for final abutments ∅ 3.8 mm Crown, ∅ 4 mm, gingiva height 3.5 mm, abutment height 2 mm, for final abutments ∅ 3.8 mm Crown, ∅ 4 mm, gingiva height 3.5 mm, abutment height 4 mm,...

Bone Level BLX RB/WB RB/WB Prosthetic Healing Abutments

Bone Level BLX RB/WB RB/WB Prosthetic Crowns and Bridges Temporary Abutments RB/WB Temporary Abutment RB/WB Temporary Abutment for Bridge/Bar for crowns, 0 3.8 mm, gingiva height 1.5 mm for crowns, 0 3.8 mm, gingiva height 2.5 mm for crowns, 0 3.8 mm, gingiva height 3.5 mm for crowns, 0 4.5 mm, gingiva height 1.5 mm for crowns, 0 4.5 mm, gingiva height 2.5 mm for crowns, 0 4.5 mm, gingiva height 3.5 mm for crowns, 0 6 mm, gingiva height 2.5 mm for crowns, 0 6 mm, gingiva height 3.5 mm for bridges, 0 4.5 mm, gingiva height 1.5 mm, abutment height 5.5 mm Replacement Screw RB/WB Basal Screw Sees for...

Bone Level BLX RB/WB RB/WB Prosthetic Crowns and Bridges Cement or Screw-retained Restoration, Variobase® Product Variobase® Abutments RB/WB Variobase® for Crown Prosthetics RB/WB Variobase® for Bridge/Bar Cylindrical RB/WB Variobase® for Crown AS Burn-out Copings RB/WB Burn-out Coping including screw, 0 3.8 mm, gingiva height 1.5 mm, TAN abutment height 5.5 mm including screw, 0 3.8 mm, gingiva height 2.5 mm, abutment height 5.5 mm 0 3.8 mm, gingiva height 3.5 mm, abutment height 5.5 mm including screw, 0 4.5 mm, gingiva height 1.5 mm, abutment height 5.5 mm including screw, 0 4.5 mm, gingiva...

Bone Level BLX RB/WB RB/WB Prosthetic Crowns and Bridges Screw-retained Restoration with Screw-retained Abutment, Abutments, sterile Product Screw-retained Abutments 0°, sterile RB/WB Screw-retained Abutment straight, angle 0°, 04.6 mm, gingiva height 1.5 mm, sterile straight, angle 0°, 0 4.6 mm, gingiva height 2.5 mm, sterile straight, angle 0°, 0 4.6 mm, gingiva height 3.5 mm, sterile straight, angle 0°, 0 4.6 mm, gingiva height 4.5 mm, sterile Screw-retained Abutments 17°, sterile RB/WB Screw-retained Abutment angled, angle 17°, 0 4.6 mm, gingiva height 3.5 mm, sterile angled, angle 17°, 0...

Bone Level BLX RB/WB RB/WB Prosthetic Screw-retained Restoration with Screw-retained Abutment Product Impression Posts (at abutment level) for Single Crown Restoration (engaging) Impression Posts for Open-tray Impression for Screw-retained Abutments, abutment level, ∅ 4.6 mm Impression Posts for Closed-tray Impression Impression Posts (at abutment level) for Multi-Unit Restorations (non engaging) Impression Posts for Open-tray Impression for Screw-retained Abutments, abutment level, ∅ 4.6 mm Impression Posts for Closed-tray Impression Digital Impression CARES® Mono Scanbody for Screw-retained...

Bone Level BLX RB/WB RB/WB Prosthetic Crowns and Bridges Variobase® Copings Variobase® Coping for for Screw-retained Abutments 0 4.6 mm, including TAN 023.0001 Screw-retained Abutments screw 023.4763, height 3.5 mm for Screw-retained Abutments 0 4.6 mm, including screw 023.4763, 0 5.1 mm, height 4 mm Variobase® for Bridge/Bar Cylindrical Coping for Screw-retained Abutments Titanium Copings Coping for Screw-retained Abutments for Screw-retained Abutments 0 4.6 mm, for crowns, including screw 023.4763, height 11 mm 023.4747 for Screw-retained Abutments 0 4.6 mm, for bridges, including...