*mymedicalexpo

Catalogs
INT Medical Instruments
MCS010 INT Microcatheters

MCS010 INT Microcatheters

Product catalog summary

Coronary Microcatheter Specifications:
- Constructed with a stainless steel braid and PTFE inner layer for enhanced guidewire tracking.
- Features a 0.6mm platinum/iridium radiopaque marker for precise positioning.
- Distal tip cross-section dimensions: 0.40 mm (0.016”) and 0.54 mm (1.6 Fr).
- Available in different models with varying lengths and diameters (e.g., MCS02-0, MCS03-0).

Peripheral Microcatheter Specifications:
- Incorporates a tungsten coil design with a PTFE inner layer for improved guidewire tracking and contrast imaging.
- Preloaded with a 0.021” guidewire to streamline procedures and reduce time.
- Distal tip cross-section dimensions: 0.68 mm (0.027”) and 0.93 mm (2.8 Fr).
- Available in models such as MCS02-6 and MCS03-6 with specific lengths and diameters.

Super Selective Peripheral Microcatheter:
- Features a 2.1 Fr tip with a PTFE inner layer and tungsten coil design.
- Enhanced with a stainless steel braid for structural integrity.
- Equipped with a 0.6mm platinum/iridium radiopaque marker for accurate catheter positioning.
- Distal tip cross-section dimensions: 0.43 mm (0.017”) and 0.72 mm (2.1 Fr).
- Models include MCS02-2 and MCS03-2, offering different lengths and diameters.

General Recommendations:
- Each microcatheter type is designed for specific guidewire compatibility and procedural efficiency.
- The radiopaque markers aid in precise catheter placement during medical procedures.

Catalog excerpts

CORONARY MICROCATHETER PTFE inner layer PTFE inner layer is designed for exceptional guidewire tracking. Braid Stainless Steel Higher density stainless steel braid structure throughout the length of the catheter shaft. Radiopaque Marker 0.6mm platinum/iridium radiopaque marker, aid in the positioning of the catheter. Distal Tip Cross Section Stainless Steel Braid + PTFE inner layer Structure & ordering information Radiopaque marker Proximal shaft Distal shaft Usable Length Outer Diameter Inner Diameter Usable Length Recommended Guidewire Distal Shaft Proximal Shaft

Open the catalog to page 2

PERIPHERAL MICROCATHETER PTFE inner layer PTFE inner layer is designed for exceptional guidewire tracking. Preloaded 0.021” Guidewie Speicially designed 0.021” Guidewire is preloaded within the Peripheral Microcatheter. Enables simultaneous flushing of Microcatheter and Guidewire. Reduces procedural steps to save time. Tungsten coil design Improve it’s effects in contrast imaging. Distal Tip Cross Section Tungsten coil + PTFE inner layer Structure & ordering information Proximal shaft Distal shaft Usable Length Outer Diameter Inner Diameter Usable Length Recommended Guidewire Distal Shaft Proximal...

Open the catalog to page 3

PERIPHERAL MICROCATHETER PTFE inner layer PTFE inner layer is designed for exceptional guidewire tracking. Braid Stainless Steel Higher density stainless steel braid structure throughout the length of the catheter shaft. Tungsten coil design Improve it’s effects in contrast imaging. Distal Tip Cross Section Radiopaque Marker 0.6mm platinum/iridium radiopaque marker, aid in the positioning of the catheter. Super selective catheter with 2.1Fr Tip. Structure & ordering information Radiopaque marker Proximal shaft Distal shaft Usable Length Outer Diameter Inner Diameter Usable Length Recommended...

Open the catalog to page 4

MCS010 INT Microcatheters

MCS010 INT Microcatheters

Catalog excerpts

All INT Medical Instruments catalogs and technical brochures

Archived catalogs