1. Catalogs
  2. Integrity Medical Devices
  3. Integrity Petrolatum SDS

Integrity Petrolatum SDS

Integrity Petrolatum SDS

Integrity Petrolatum SDS

Product catalog summary
Product Identification
Product Name: Petrolatum Gauze Non-Adherent Dressing - Sterile
Manufacturer: Integrity Medical Devices, Inc.
Contact: 360 Fairview Ave, Hammonton, NJ 08037, Tel: 609-816-0848, Emergency: 1-800-424-9300
Hazard Identification
No hazards identified.
Composition
Main Ingredient: Petrolatum (CAS Number: 8009-03-8)
First-Aid Measures
Eye Contact: Flush with water for 15 minutes if molten product contacts eyes.
Other exposures: No data available.
Fire-Fighting Measures
Extinguishing Media: Dry chemical, water fog, CO2, foam, sand/earth.
Special Procedures: Use self-contained breathing apparatus; water spray is unsuitable.
Accidental Release Measures
Small/Large Spills: Clean immediately, use personal protective equipment, dispose according to regulations.
Handling and Storage
Handling: Product does not release hazardous chemicals under normal use.
Storage: Store in original packaging, avoid heat and open flame.
Exposure Controls/Personal Protection
No special protective equipment normally needed.
Physical and Chemical Properties
Appearance: White cotton gauze with opaque white ointment.
Evaporation Rate: 0 at 25°C.
Stability and Reactivity
Stable under normal conditions; avoid strong oxidizing agents.
Toxicological Information
No data available.
Additional Information
Document Date: 05/01/2015
See more

Catalog excerpts

Integrity Petrolatum SDS-1

INTEGRITY MEDICAL DEVICES, INC. Safety Data Sheet Section 1: Identification Product Identifier: PETROLATUM GAUZE NON ADHERENT DRESSING - STERILE Synonyms: PETROLATUM GAUZE NON ADHERENT DRESSING - STERILE Manufacturer Stock Numbers: 16-1136, 16-1180, 16-1272, 16-1318, 16-1336, 16-1636, 25-1390 Distributed by: INTEGRITY MEDICAL DEVICES, INC. Address: 360 FAIRVIEW AVE City, State, Zip Code: HAMMONTON, NJ 08037 Telephone: 609-816-0848 Emergency Number: Chemtrec: 1-800-424-9300 Section 2: Hazard(s) Identification None Section 3: Composition/Information on Ingredients Chemical Name: Petrolatum Cas Number: 8009-03-8 Weight: N/A Section 4: First-Aid Measures Threshold Limit Value: No data available. Effects of Overexposure: No data available. First Aid: Ingestion: No data available. Eye Contact: For molten product only, immediately flush with large quantities of water for at least 15 minutes and call a physician.

 Open the catalog to page 1
Integrity Petrolatum SDS-2

Skin Contact: (See Eye Contact) Inhalation: no data available Additional Information : None Section 5: Fire-Fighting Measures Flammability Class: no data available Extinguishable Media: Drychemical or Waterfog or CO2 or Foam or Sand/Earth. Closed containers exposed to fire may be cooled with water. Special Fire Fighting Procedures: Wear self-contained breathing apparatus. Water spray is an unsuitable extinguishing agent. (See extinguishing media) Unusual Fire and Explosion Hazards: None Section 6: Accidental Release Measures Non-hazardous Small Spill: Should be cleaned up at the time of the spill....

 Open the catalog to page 2
Integrity Petrolatum SDS-3

Protective Gloves: Not normally needed. Eye Protection: Not normally needed. Section 9: Physical and Chemical Properties Boiling Range: no data available Evaporation Range: 0 at 25 degrees C. Vapor Density: not applicable. Volatiles Volume:0 at 25 degrees C Specific Gravity: not applicable Appearance: white cotton gauze impregnated with an opaque white ointment. Section 10: Stability and Reactivity Stability: Stable Hazardous Polymerization: Hazardous polymerization will not occur Incompatibility: May react with strong oxidizing agents such as chlorates, nitrates, peroxides, etc. Conditions to...

 Open the catalog to page 3

All Integrity Medical Devices catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.