Case Cart SPEC SHEET
2Pages

{{requestButtons}}

Catalog excerpts

Case Cart SPEC SHEET - 1

The functional design of Metro Case Carts maximize usable inside space for handling storage and transport tasks efficiently. Carts can be used wherever contents must be protected from an “unclean” environment, including free-standing ambulatory care centers, surgicenters, and hospital based or out-patient surgeries. • Quiet: Embossed sides and back, reinforced top and floor, softer wheels and other noise dampeners, provide a noticeably quieter ride. • Adjustable: Shelf brackets attach and detach quickly from unique “keyhole” slots for easy shelf adjustability at 2" (51mm) increments. • Serviceable: Double-panel door construction offers better strength and minimizes maintenance. Caster channels on each side of the cart allows individual replacement should a damaging situation occur. In the same situation, other models would have to replace the entire dolly. • Efficient: Stainless steel cabinet and optional shelves have smooth or protected edges to eliminate ripping of packs that can cause costly waste or reprocessing. • Easily Maneuverable: Full length handles on both sides of the low profile carts and CASE36-H allow for pushing or pulling from either end and provide better cart control. One full length handle is ergonomically located on the CASE24-H cart. • Proficient: Carts are designed to maximize interior cubic storage space and minimize the exterior footprint delivering the most cubic storage capacity per square foot to provide ample capacity for transport and efficiency for staging. • Cleans Easily: Stainless steel construction makes units cart washable. Shelves and brackets remove for washing. Weep holes at the cart’s front corners and underside of door panels facilitate drainage and drying. • Accessible: Wire roller shelf extends out half way, easily and quietly, even at lowest level where accessibility is vital. Also available in solid or wire without roller. Metro Case Carts METRO CASE CARTS • High-Profile Model Available: The high-profile models (CASE24-H, CASE36-H) save floor space, as compared to conventional case carts. The vertical design eliminates “stooping” and offers quick, easy “stand-up” access to most contents. • Durable: Stainless steel casters are standard, not an optional upgrade. They are non-corrosive and cart-washable. InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA 18705 www.metro.com

Open the catalog to page 1
Case Cart SPEC SHEET - 2

METRO CASE CARTS Specifications Metro Case Carts • Cart: — Type 304 Stainless Steel, No. 3 finish type. — Body embossments to dampen vibration noise — Sloped flanges and weep holes to promote water drainage — Reinforced top and floor to stiffen surface and reduce vibration noise — Stainless steel door stay with nylon roller — Welded door hinges to maintain door alignment • Doors: — Stainless steel, double panel — Weep holes in bottom to promote drainage — Removable — Embossed interior to reduce vibration noise — Replaceable paddle latch with security option • Shelves (sold separately): —...

Open the catalog to page 2

All InterMetro catalogs and technical brochures

  1. myCart

    2 Pages