BagFilter® Pipet & Roll Lateral filter bag for lab blender with pipet access and built-in closure Ref. 111 720 (400 mL) Standards: ISO 7218 FDA BAM Bacteriological Analytical Manual Manufactured under: MADE IN FRANCE BagFilter® Pipet & Roll is a blender bag with a lateral non-woven filter for all microbiological analyses. The reclosable sticker allows easy pipetting with a micropipette cone and the built-in closure allows a water-tight storage of the bag. Cross contamination risks are reduced with pipet cones for pathogens pre-enrichment bags. The lower pipetting height makes it easy to work, preventing Musculoskeletal Disorders. Filtration is instantaneous. Finally, quick and clean waste disposal of the bags. TECHNICAL SPECIFICATIONS • • • • • • • • • • • • • • • • • • • • Bag with lateral filter Reclosable sticker for easy pipetting with a micropipette cone Built-in sticker for bag closure, roll the top of the bag 3 times for water-tight closure Closure 100% metal free Compatible with BagRack® Slide (Ref 221 440) Reduces risks of cross contamination with pipet cones for pathogens pre-enrichment bags Reduces risks of Musculoskeletal Disorders (MSD) For all types of sample (fibrous, pasty…) Multilayer®: reinforced multicoated complex Lateral non-woven filter Filter porosity: < 250 micrometers Rigid and transparent Temperature resistance: From -20°C to 45°C (48h) / 80 °C (4h) - From -4°F to 113°F (48h) / 176°F (4h) No contact between the sample and the blender during homogenization of the sample Compatible with any lab blender Patented Gamma ray treated: Gamma 5 to 12 kGy, with certificate Shelf-life: 5 years Storage: in a temperate and dry place, away from humidity and light Available in 400 mL • In compliance with ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual) • Approved for food contact - Regulation (EC) N° 1935/2004 • Designed and made in France BagFilter® Pipet & Roll 400 Ref. 111 720 • • • • • • • Max blending volume: 400 mL Optimal blending volume: 50 - 300 mL Optimal pipetting volume: 250 mL Bag dimensions: 190 x 300 mm Box dimensions: 35 x 22 x 15 cm, weight: 5.40 kg Pack of 25 Box of 500 1 / 1 BagFilter Pipet & Roll_FT_0322 Pictures and information are not contractually binding. For presentation reasons, the pipetting zone is shown on the left of the drawing. BagFilter is a trademark. INTERSCIENCE reserves the right to change or improve the specifications of its products without notice. Please visit www.interscience.com for current updates and additi