Catalogs >
INTERSCIENCE >
instaBAG Fraser ½ technical file

instaBAG Fraser ½ technical file
2Pages

Catalog excerpts

Manufactured under: instaBAG® Fraser V is a bag with non-woven lateral filter for microbiological analyses, which includes a dehydrated predosed Fraser / media. Simply add a sample and sterile water before blending. The culture media dissolves perfectly during blending. The filtration is instantaneous without cross-contamination. TECHNICAL SPECIFICATIONS Ready-to-use bag with pre-dosed dehydrated media • Bag with lateral non-woven filter • For pipetting • For all types of samples (fibrous, pasty, ...) • Multilayer®: multicoated reinforced complex • Filter porosity: < 250 micron • Rigid and transparent • No contact between the sample and the blender during homogenization of the sample • Compatible with any 400 mL blender • Type of dehydrated media: supplemented Fraser / • Fraser / is used as a medium for primary selective enrichment or as a diluent for the detection and enumeration of Listeria monocytogenes and Listeria spp. (ISO 11290-1, ISO 11290-2) in food and environmental samples. • Blending time: 2 minutes • Approved for food contact: Regulation (EC) No 1935/2004 • Gamma ray treated: Gamma 10 to 25 kGy, with certificate • Shelf life: 30 months • Storage conditions: room temperature (+ 10°C a + 30°C). Close the pouch after opening to avoid humidity. • Available in 225 mL size • In compliance with ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual) • The control of Fraser / medium performances follows ISO 11133. A compliance certificate is available on request. • Designed and made in France

Open the catalog to page 1

COMPOSITION Typical formula* for 1L of reconstituted medium: • • • • • • • • • • • • Enzymatic digest of animal tissues: 5,0 g Casein enzymatic digest: 5,0 g Meat extract: 5.0 g Yeast extract: 5.0 g Sodium chloride: 20.0 g Disodium hydrogen phosphate dihydrate: 12.0 g Potassium dihydrogen phosphate: 1.35 g Esculin: 1.0 g Lithium chloride: 3.0 g Sodium salt of nalidixic acid: 0.01 g Acriflavine hydrochloride: 0.0125 g Iron (III) ammoniacal citrate: 0.5 g * Adjusted to meet the performance criteria required by the standards Place the sample in the filter bag instaBAG® Add water (sterile,...

Open the catalog to page 2

instaBAG Fraser ½ technical file 2Pages

Catalog excerpts

All INTERSCIENCE catalogs and technical brochures

instaBAG Fraser ½ technical file
2Pages