INTERTON START® BUDGET CLASS HEARING SYSTEM CIC Technical Datasheet

Product catalog summary

Overview: The document provides technical specifications and features of the Interton Start hearing aid models SA10 and SA10 HPG, designed for budget-conscious consumers. It highlights the use of digital hearing technology for noise suppression, directionality, and environmental adaptability.

Key Features:

Logarithmic 6 Channel Wide Dynamic Range Compression (WDRC)
3 Gain Handles in Fitting Software
Background and Microphone Noise Reduction
Adaptive Feedback Cancellation
Audible Signal Tones
Earwax Management System
Standard and Power Configurations
On/Off switch via the battery door
Left/right side indicators

Technical Specifications:

Models: SA10, SA10 HPG
Full-on Gain and Reference Test Gain measured according to IEC standards
Maximum Power Output (MPO) and Band Width detailed
Electroacoustic performance measured with IEC 118-0 Ear Simulator and 2cc Coupler
Reference test gain at 1600 Hz: 28-37 dB
Full-on gain at 1600 Hz: 38-47 dB
Maximum output at 90 dB SPL input: 110-126 dB SPL
Total harmonic distortion at 800 Hz: 0.5-1.4%
Equivalent input noise without noise reduction: 23-28 dB SPL
Frequency range: 100-5910 Hz
Current drain: 0.85-0.9 mA
Battery life (type 10): 100-106 hours

Performance Metrics:

Maximum Output (OSPL 90) and Gain measured with 2cc Coupler and IEC 711 Ear Simulator
Input/Output Response at 1.6 kHz

Conclusion: The Interton Start hearing aids offer a comprehensive set of features suitable for users seeking cost-effective solutions without compromising on essential hearing aid functionalities.

Catalog excerpts

INTERTON START® BUDGET CLASS HEARING SYSTEM CIC Technical Datasheet-1

BUDGET CLASS HEARING SYSTEM Interton Start uses well-proven digital hearing technology, including noise suppression, directionality and environmental programmes. So if you are looking for a fully featured hearing aid to attract today’s more budget-minded customers, Interton Start is the perfect solution. Features/Options • Logarithmic 6 Channel WDRC • 3 Gain Handles in Fitting Software • Background Noise Reduction • Microphone Noise Reduction • Adaptive Feedback Cancellation • Audible Signal Tones • Earwax Management System • Standard and Power Configurations • On/Off switch via the battery door • Left/right side indicators

Open the catalog to page 1

INTERTON START® BUDGET CLASS HEARING SYSTEM CIC Technical Datasheet-2

Current Drain Typical Battery life time (Battery type 10) Reference test gain (60 dB SPL input) Full-on gain (50 dB SPL input) Maximum output (90 dB SPL input) Total harmonic distortion Equivalent input noise w/o Noise reduction Maximum Output (OSPL 90) Maximum Output (OSPL 90) Occluded Ear Simulator 2 cm3 coupler Acoustic input signal Basic settings: Full-on Gain, Reference Test Gain MPO = Maximum Power Output Maximum Band Width Full-On and Reference Test Gain Full-On and Reference Test Gain 2cc Coupler Full-on gain Pi = 50dB SPL Reference test gain Pi = 60dB SPL Input/Output Response Reference...

Open the catalog to page 2