TYPE OF PRODUCTS IP65 LED compact recessed luminaires, access from the top and the bottom. For installation in cut-out ceiling. MECHANICAL CONSTRUCTION Luminaire housing made of steel. Powder coated with KilBac white RAL 9003, certified qualicoat class 1 and antibacterial. Upper clamping frame in lacquered steel. Upper cover bright red lacquered. Bottom frame in white lacquered extruded aluminum, screwed on the luminaire housing by 4 stainless steel screws. LED MODULES Zagha LED modules Book7, L28W6, with an energy efficiency until 185 Lm/W, rated AA+. Assembled on a 2 mm aluminium plate to ensure an optimal heat dissipation for the lifespan of the LEDs. Low chromatic distortion : 3SDCM. Colour rendering index over 90. Expected luminous flux : L80 at 70.000 h. OPTICS - OPPC : opal polycarbonate diffuser, high impact resistance. - OPMI : opal diffuser in PMMA, high chemical resistance. - MPPC : polycarbonate micro prismatic diffuser which reduce luminance to achieve UGR lower than 19. - MPVR : optics made of hardened laminated glass and an internal microprism diffuser which reduce luminance to achieve UGRs lower than 19. Excellent resistance to hydrogen peroxide. CONTAMINATION CONTROL Reduced risk of microbial growth : >> KilBac technology, broad spectrum antibacterial finish with silver ions (BioCote, validated according to ISO 22196). >> CleanSeal technology, use of two-component antimicrobial seals according to VDI-6022 and DIN EN ISO 846. The mechanical construction of the luminaire ensures a particle emission class 1 according to ISO 14644-14. This result is certified by the Fraunhofer IPA laboratory. This range is made without silicone. WALKABLE Luminaires designed and tested to withstand the application of a 100 kg mass on the top cover corresponding to accidental feet pressure on the luminaire in the walkable plenum. H2O2 RESISTANCE The components that may come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see the resistance in the reference table. POWER SUPPLY Luminaires supplied with European-branded EPF electronic driver. Rated voltage 220-240 V. DALI dimming (GDA) available in option. Access from the top or the bottom. INSTALLATION Installation in sandwich panels from 15 to 100 mm. Adaptations for different thicknesses are possible on request. Quick installation without opening the luminaire. The sealing between the false ceiling and the lower frame must be applied at the installation. WIRING By a waterproof Wieland brand connector, RST20i, fixed to the top of the luminaire (installation on flexible cord). TEMPERATURE AND HUMIDITY Reference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs). For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the housing, in o

BATDX OPTIONS Reinforced clamping frame Reinforced clamping frame made of 2 mm steel. Philips Trustsight BASIC kit, 3.6 V 4000 mAh NiMH battery, power supply 3 W for 3 h, approx. 300 Lm.

BATDX REFERENCES AND FEATURES REFERENCE OPPC optics MPPC optics MPVR optics Light and power output tolerance ± 10% Standards and warranty Compliance : information on the compliance of our products with the relevant standards and directives is available on our website. Warranty : our warranty conditions are indicated in our general terms and conditions of sale. There are special conditions depending on the product range. These conditions can be checked on our website : www.isoone-cleanroom-lighting.com/conditions-generales-de-vente/ Temperature and switches on : the operating temperature and the...