TYPE OF PRODUCTS Compact recessed LED luminaires, IP65, access from below. Wide range of powers and dimensions. Installation in false ceiling with cut-out. MECHANICAL CONSTRUCTION Luminaire structure made of 0.8 mm steel. Powder coated with KilBac white RAL 9003, certified qualicoat class 1 and antibacterial. White lacquered aluminium frame fixed to the housing by 4 stainless steel screws, closed by overlapping. Screwless frame available in option (SV). LED MODULES Zagha LED modules Book7, L28W6, with an energy efficiency until 185 Lm/W, rated AA+. Assembled on a 2 mm aluminium plate to ensure an optimal heat dissipation for the lifespan of the LEDs. Low chromatic distortion: 3SDCM. Colour rendering index over 90. Expected luminous flux : L80 at 70.000 h. Light spectra : white 4000 K, white gradation (TW), inactinic amber 590 nm, inactinic red 640 nm. OPTICS - TRPC/30 : intensive optics (30º), microlenses installed directly on the LED module. Transparent polycarbonate diffuser. - TRPC/60 : intensive optics (60º), microlenses installed directly on the LED module. Transparent polycarbonate diffuser. - OPPC : opal polycarbonate diffuser, high impact resistance. - OPMI : opal diffuser in PMMA, high chemical resistance. - MPPC : polycarbonate micro prismatic diffuser which reduce luminance to achieve UGR lower than 19. - MPVR : optics made of hardened laminated glass and an internal microprism diffuser which reduce luminance to achieve UGRs lower than 19. Excellent resistance to hydrogen peroxide. CONTAMINATION CONTROL Reduced risk of microbial growth : >> KilBac technology, broad spectrum antibacterial finish with silver ions (BioCote, validated according to ISO 22196). >> CleanSeal technology, use of two-component antimicrobial seals according to VDI-6022 and DIN EN ISO 846. The mechanical construction of the luminaire ensures a particle emission class 3 according to ISO 14644-14. This range is made without silicone. H2O2 RESISTANCE The components that may come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution. TEMPERATURE AND HUMIDITY Reference ambient temperature: 20ºC / 68ºF. Operating temperature range : 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs). For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the housing, in option. INSTALLATION Installation of the housing in false ceiling with cut-out, from 13 to 80 mm thickness : - By clamping (supplied with the luminaire) which allow an installation from the inside of the luminaire with the IsoFlex system, which ensure the watertightness. - By suspension with threaded rods (not supplied) fixed to the housing. - By optional mounting brackets. WIRING Wieland waterproof connector RST20i male + female on HO7RNE 3G1.5 cord. DRACO POWER SUPPLY Luminaires supplied with European-branded electronic driver. Rated voltage 220-240 V 50/60 Hz. Access to the luminaire from the bottom. Rated voltage from 220 to 240 V. DALI dimming (GDA) available in

DRACO OPTIONS KS3 emergency kit Philips Trustsight BASIC kit, 3.6 V 4000 mAh NiMH battery, power supply 3 W for 3 h, approx. 300 Lm. Frame without screws (SV) The 4 INOX screws are replaced by internal springs. DETAILS OPTIONAL CLAMPING

DRACO REFERENCES AND FEATURES REFERENCE TRPC/30 optics - Intensive 30° - Polycarbonate EDO2021EPF TRPC/60 optics - Opening 60º - Polycarbonate EDO2023EPF OPPC optics - Polycarbonate opal EDO2013EPF EDO2014EPF OPMI optics - PMMA opal diffuser EDO2092EPF MPPC optics - Polycarbonate micro-prismatic EDO2086EPF MPVR optics - Laminated tempered glass and micro-prismatic diffuser EDO2185EPF White gradation (TW) - MPPC optics - Polycarbonate micro-prismatic EDO2087GDATW 590 nm amber inactinic light - OPMI optics EDO2209EPF 640 nm red inactinic light - OPMI optics EDO2208EPF Light and power output tolerance...

Standards and warranty Compliance : information on the compliance of our products with the relevant standards and directives is available on our website. Warranty : our warranty conditions are indicated in our general terms and conditions of sale. There are special conditions depending on the product range. These conditions can be checked on our website : www.isoone-cleanroom-lighting.com/conditions-generales-de-vente/ Temperature and switches on : the operating temperature and the number of daily switches have an influence on the lifetime of the products. Our luminaires are designed to withstand...