TYPE OF PRODUCTS Recessed LED luminaire IP65 with smooth opal polycarbonate, PMMA optics, or glass. Access from the top. Wide range of powers and dimensions. Installation in sandwich panels. MECHANICAL CONSTRUCTION Luminaire structure made of 1 mm steel. Powder coated with KilBac white RAL 9003, certified qualicoat class 1 and antibacterial. Upper clamping frame in white lacquered steel. Upper cover red lacquered for a better identification of the luminaires. LED MODULES European LED circuits with very high efficiency (> 150 Lm/W), screwed on a internal plate made of steel to ensure an optimal heat dissipation for the lifespan of the LEDs. 3SDCM. Expected luminous flux: L80 at 70.000 h. OPTICS Optical assembly bonded with silicone-free sealant, certified for use in clean rooms : - OPPC : opal polycarbonate plate with high resistance to impact. - OPMI : opal plate in PMMA with high resistance to chemical agents. - MPVR : tempered glass diffuser + inner microprismatic plate. High visual comfort, easy cleaning excellent ageing. CONTAMINATION CONTROL Reduced risk of microbial growth : >> KilBac technology, broad spectrum antibacterial finish with silver ions (BioCote, validated according to ISO 22196). The mechanical construction of the luminaire ensures a particle emission class 3 according to ISO 14644-14. This range is made without silicone H2O2 RESISTANCE The components that may come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution. TEMPERATURE AND HUMIDITY Reference ambient temperature: 20ºC / 68ºF. Operating temperature range : 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs). For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the housing, in option. POWER SUPPLY Luminaires supplied with European-branded EPF electronic driver. Rated voltage 220-240 V. DALI dimming (GDA) available in option. Access from the top of the luminaire, without breaking the room classification. INSTALLATION Installation of the luminaire structure from the bottom, clamping of the holding frame from the top with 4 or 6 knurled nuts, without any need to open the luminaire. Luminaire made for installation in false ceilings from 15 to 100 mm. The sealing between the false ceiling and the lower frame must be applied at the installation. WIRING By a waterproof Wieland brand connector, RST20i, fixed to the top of the luminaire (installation on flexi

Philips Trustsight BASIC kit, 3.6 V battery 4000 mAh NiMH battery, power supply 3 w for 3 h, approx. 300 Lm.

Ir77_HLED REFERENCES AND FEATURES CODE OPMI optics - Opal PMMA diffuser EUP2072EPF OPPC optics - Polycarbonate opal diffuser EUP2075EPF MPVR optics - Tempered glass diffuser + inner microprismatic plate EUP2202EPF Light and power output tolerance ± 10% Standards and warranty Compliance : information on the compliance of our products with the relevant standards and directives is available on our website. Warranty : our warranty conditions are indicated in our general terms and conditions of sale. There are special conditions depending on the product range. These conditions can be checked on our...