TYPE OF PRODUCTS Cleanroom luminaires, circular, recessed LED, IP65, access from the top. Walkable solution. MECHANICAL CONSTRUCTION Structure of the luminaire made of 1 mm steel continuously welded. Powder coated with KilBac white RAL 9003, certified qualicoat class 1 and antibacterial. Upper clamping frame made of 3 mm red lacquered aluminium. Top cover red lacquered of 1 mm steel. LED MODULES Circular LED modules with an energy efficiency until 170 Lm/W. Assembled on a 2 mm aluminium plate to ensure an optimal heat dissipation for the lifespan of the LEDs. Low chromatic distortion: 3SDCM. Colour rendering index over 90. Expected luminous flux : L80 at 50.000 h. OPTICS - OPMI : opal diffuser in special LED PMMA (Perspex). CONTAMINATION CONTROL Reduced risk of microbial growth : >> KilBac technology, broad spectrum antibacterial finish with silver ions (BioCote, validated according to ISO 22196). The mechanical construction of the luminaire ensures a particle emission class 3 according to ISO 14644-14. This range is made without silicone. WALKABLE Luminaires designed and tested to withstand the application of a 100 kg mass on the top cover corresponding to accidental feet pressure on the luminaire in the walkable plenum. H2O2 RESISTANCE The components that may come into contact with hydrogen peroxide during the decontamination process were tested by cyclic, direct and prolonged contact with a 35% H2O2 solution, see the resistance in the reference table. TEMPERATURE AND HUMIDITY Reference ambient temperature: 20ºC / 68ºF. Operating temperature range: 5 to 25ºC / 41 to 77 ºF (the temperature affects the lifetime of the LEDs). For environments with a moisture content of more than 70%, we recommend the use of lacquered INOX 304 for the housing, in option. POWER SUPPLY Luminaires supplied with European-branded EPF electronic driver. Rated voltage 220-240 V. DALI dimming (GDA) available in option Access from the top of the luminaire, without breaking the room classification. INSTALLATION Installation in sandwich panels from 15 to 100 mm. Adaptations for different thicknesses are possible on request. Quick installation without opening the luminaire. The sealing between the false ceiling and the lower frame must be applied at the installation. WIRING By a waterproof Wieland brand connector, RST20i, fixed to the top of the luminaire (installation on flexible

LUNA OPTIONS Extra cover Extra walkable protection on top the luminaire. Philips Trustsight BASIC kit, 3.6 V 4000 mAh NiMH battery, power supply 3 W for 3 h, approx. 300 Lm Sauf indication contraire les cotes de pliage sont toujours EXTÉRIEURES SAUF INDICATION CONTRAIRE: Sauf SONT EN MILLIMETRES FINITION: indication contraire les cotes de pliage sont toujours L'ECHELLE NE PAS CHANGER EXTÉRIEURES REVISION LES COTES ETAT DE SURFACE: TOLERANCES: SAUF INDICATION CONTRAIRE: FINITION: LINEAIRES: LES COTES SONT EN MILLIMETRES ANGULAIRES: ETAT DE SURFACE: TOLERANCES: SIGNATURE LINEAIRES: NOM ANGULAIRES:...

LUNA INSTALLATION PLAN Clamping frame Sandwich panel Luminaire housing PHOTOGRAPHIC DETAILS View from the plenum. An additional cover for closure and protection is available in option. Power cord included but not illustrated. Installed luminaire, view from cleanroom side.

LUNA REFERENCES AND FEATURES CODE OPMI optics - PMMA opal PERSPEX diffuser EUP2208EPF Light and power output tolerance ± 10% Standards and warranty Compliance : information on the compliance of our products with the relevant standards and directives is available on our website. Warranty : our warranty conditions are indicated in our general terms and conditions of sale. There are special conditions depending on the product range. These conditions can be checked on our website : www.isoone-cleanroom-lighting.com/conditions-generales-de-vente/ Temperature and switches on : the operating temperature...