Implant prosthetics – efficient and digital Abutment Solutions For customized implant restorations fabricated with CEREC® and inLab® Making People Smil

Our Abutment Solutions enable you to fabricate individual implant-supported hybrid structures using CAD/CAM technology - for the restoration of teeth in the anterior and posterior region[1-3]. You can either fabricate implant-supported single-tooth restorations from Telio CAD when a temporary solution is required to optimize the emergence profile, or you can create permanent implant-supported restorations directly using IPS e.max CAD[1-3]. The blocks feature a predefined interface for the direct cementation of the restoration to a titanium bonding base (e.g. Dentsply Sirona TiBase). The self-curing...

Telio® CAD The temporary restoration Telio CAD is a cross-linked PMMA material for the efficient fabrication of hybrid abutment crowns. This 2-in-1 solution, i.e. crown and abutment combined, is used after the insertion of the implant and before the placement of the permanent restoration made of IPS e.max® CAD[1, 4]. Provisional Telio CAD restorations support gingival recontouring during the initial treatment phase. The surrounding soft tissue is individually shaped[1, 4]. Blocks are available in size A16 and in nine shades (BL3, A1, A2, A3, A3.5, B1, B3, C2, D2) as well as in the translucency...

IPS e.max® CAD The final implant-supported restoration Once a permanent solution is required, IPS e.max CAD can be used to fabricate individual hybrid structures for implant-supported single-tooth restorations[1, 3]. Depending on the situation, a tooth-shaded hybrid abutment with separate crown or a monolithic hybrid abutment crown can be fabricated[1-2]. The particularly strong lithium disilicate glass-ceramic (530 Mpa[5]) follows on seamlessly from the temporary Telio CAD restoration. Hybrid abutment Hybrid abutment crown Esthetic restorations due to tooth-shaded hybrid abutments Blocks are...

Multilink® Hybrid Abutment Extraoral cementation Telio CAD and IPS e.max CAD restorations are cemented to the titanium bonding base in only a few steps using the self-curing luting composite Multilink Hybrid Abutment. Monobond Plus The universal primer conditions the titanium bonding base and the IPS e.max CAD restoration and prepares both for the cementation with Multilink Hybrid Abutment. Permanent cementation due to high bond strength values[1, 3] SR Connect The bonding agent conditions the temporary restoration made of Telio CAD and prepares it for the cementation with Multilink Hybrid Abutment....

The IPS e.max Guarantee IPS e.max has been a firm favourite with dentists and patients for many years. Every 10 seconds, an IPS e.max restoration is placed [6]. "Telio CAD A16 and IPS e.max CAD blocks optimally complement each other. Therefore, CAD/CAM users are provided with a complete digital workflow which enables them to reliably fabricate temporary restorations and permanent hybrid abutment crowns." Dr S. Puri, USA "Telio CAD A16 blocks close the gap in the system chain of the proven IPS e.max CAD Abutment Solutions by including the temporization stage. The temporary restoration can be incorporated...

Individualized implant restorations Preparation OptraGate for retracting the lips and cheeks easily and gently over a large area Temporary restoration Telio CAD for temporation restorations Permanent restoration IPS e.max CAD for permanent customized hybrid restorations Cementation Multilink Hybrid Abutment for permanently cementing restorations to the titanium bonding base Ivoclar Vivadent AG | Bendererstrasse 2 | 9494 Schaan | Liechtenstein Tel. +423 235 35 35 | Fax +423 235 33 60 Implant Care products for assuring the long-term quality of valuable implant restorations