Introduction
The bluephase® meter is an innovative radiometer designed to accurately measure the intensity of LED curing lights, which is crucial for ensuring the quality of light-cured dental restorations. Regular checks of curing light performance are recommended to ensure adequate polymerization with minimal curing times.

Specifications
The bluephase meter is suitable for all LED curing lights with a circular light emission window. It features a unique measuring principle that considers the radiating surface, allowing for precise determination of available light intensity. The device uses an intelligent line sensor to measure emitted power and the diameter of the light emission window, with a micro-processor calculating the light intensity.

Measuring Process
The process is user-friendly: position the light probe on the line sensor using the centering gauge, switch on the curing light, and read the intensity on the display.

Technical Data

• Wavelength range: 385 - 515 nm
• Light intensity range: 300 - 2,500 mW/cm²
• Suitable for circular light sources with a diameter of 7 - 13 mm
• Operating voltage: 4.5 VDC
• Power supply: 3 x LR6 AA 1.5 VDC
• Warranty: 3 years

Key Features

• Up to 256 individual sensors determine the power emitted by the curing light.
• The first and last irradiated sensors determine the diameter and radiating surface of the light emission window.

Contact Information
Ivoclar Vivadent AG, Bendererstr. 2, FL-9494 Schaan, Principality of Liechtenstein. Tel: +423 235 35 35, Fax: +423 235 33 60, Website: www.ivoclarvivadent.com

Disclaimer
Descriptions and data do not constitute a warranty of attributes.