Catalogs >
Ivoclar Vivadent >
IPS e.max CAD - Block Range

IPS e.max CAD - Block Range
1 / 6Pages

Catalog excerpts

www.ivoclarvivadent.com Ivoclar Vivadent AG Bendererstr. 2 | 9494 Schaan | Liechtenstein Tel.: +423 235 35 35 | Fax: +423 235 33 60 • ■ ivoclar vivadenl: passion vision innovation ivoclar vivadenl:

Open the catalog to page 1

FOR A COMPREHENSIVE RANGE OF INDICATIONS FOR NATURAL-LOOKING, CAD/CAMFABRICATED RESTORATIONS IPS e.max® CAD is a versatile and proven lithium disilicate IPS e.max CAD blocks are available in four levels of trans glass-ceramic for use with the CAD/CAM technique, lucency (HT, MT, LT, MO). An Impulse version is also provided. providing high-strength restorations (530 MPa1). The blocks for full-contour restorations are offered in A – D Its indication spectrum includes inlays, onlays, thin veneers, and Bleach BL shades, those for the layering technique in occlusal veneers, crowns, three-unit...

Open the catalog to page 2

ips e.max® cad ht THE MINIMALLY INVASIVE BLOCKips e.max® cad mt THE BRIGHT BLOCK The HT blocks are supplied in 16 A-D and 4 Bleach BL shades. These high-translucency blocks that resemble natural enamel are ideally suitable for the fabrication of small restorations (e.g. inlays). Restorations made of HT blocks are characterized by their true-to-nature chameleon effect and the exceptional adaptation to the remaining tooth structure. They can be efficiently individualized using the staining technique. Even longer-span bridges can be fabricated in combination with a zirconium oxide framework....

Open the catalog to page 3

The LT blocks are available in 16 A-D and 4 Bleach BL The MO blocks are available in 5 group shades (MO 0, shades. Their low translucency – similar to that of natural MO 1, MO 2, MO 3, MO 4). Given their opacity, these dentin – renders these blocks suitable for creating large blocks are intended for the fabrication of substructures restorations (e. g. posterior crowns). The material exhibits that are placed on vital or slightly discoloured prepared true-to-nature brightness and chroma, which prevents the teeth. They form an excellent base for lifelike restorations restoration from looking...

Open the catalog to page 4

ips e.max® cad impulse THE OPALESCENT BLOCKips e.max® cad IN COMBINATION WITH INNOVATIVE AND TRIED-AND-TESTED LUTING MATERIALS Impulse blocks are available in two different levels of opalescence (Opal 1, Opal 2). The restorations produced with these blocks have exceptionally opalescent properties. Therefore, this material is ideal for fabricating thin veneers and veneers for light teeth which require an opalescent effect. Depending on the indication, different tried-and-tested luting materials from Ivoclar Vivadent can be chosen for cementing IPS e.max CAD restorations. Crowns and bridges...

Open the catalog to page 5

COOPERATION WITH INNOVATIVE PARTNERS As far as processing is concerned, all the blocks can be used to create nearly any type of restoration. Nevertheless, due to esthetic reasons, the following processing techniques and indications are recommended: The combination of both optimally coordinated and tried-and-tested processes and high quality standards are key to fabricating high-precision restorations. The new innovative PrograMill milling machines from Ivoclar Digital also offer these processes and standards. The success of IPS e.max CAD is also based on the longterm cooperation partners in...

Open the catalog to page 6