Programat ® EP 3000 Pressing and firing Special programs for ramic all ce d u nee all yo G2

Focus on the system idea System components as a key to success The great success of Ivoclar Vivadent’s press and ceramic furnaces is attributable to the ideally coordinated Ivoclar Vivadent materials. For example, the Programat® EP 3000 is equippd with new special programs for the IPS e.max® Press Multi ingots. Therefore, you can fully rely on your furnace and benefit from outstanding press and firing results.

Graphic monochrome display with tried-and- tested membrane-sealed keypad The user-friendly control panel features a clearly-arranged graphic display that optimally shows all the relevant informa- tion. You can conveniently operate and program the furnace by means of the tried-and-tested membrane-sealed keypad Simple, clearly-arranged menu control The simple menu control uses symbols and texts to guide you quickly to the desired program or setting and the multiple language feature expands breadth of use Convenient placement in the furnace Upon opening, the furnace head pivots upwards thus providing...

Electronic press drive with force sensor The electronic press drive with force sensor controls the pressure of the press plunger in a highly precise fashion and permits amazing press results. A compressed air connection Homogeneous heat distribution due to the high-performance QTK muffle technology The QTK heating muffle technology enables even and homo- geneous heat distribution in the furnace chamber ensuring optimum results. The high-performance heating element permits a tempera- ture increase rate of up to 140 °C / 252 °F per minute. The quick heating process provides the furnace with maximum...

ATK2 - automatic double-range temperature The ATK 2 temperature calibration system enables fully- automated and precise temperature calibration at two different temperature ranges. This provides utmost press and firing precision, as well as reproducible press and firing results for various materials, such as low-fusing and high- fusing ceramic materials Crack Detection System (CDS) As with the Programat EP 5000, the Programat EP 3000 is equipped with a Crack Detection system (CDS). This system identifies cracks in the investment ring at an early stage and reduces the pressure. In this way, the...

Stand-by key saves power Efficient use of energy and responsible use of valuable resources: Ivoclar Vivadent is committed to this goal. Therefore, the Programat EP 3000 is equipped with the new Power Saving Technology. In the stand-by mode, for example, the power con- sumption of the furnace drops by almost 40 percent. As a result, you save on electricity costs and help to protect our environment at the same time. Look out for the Power Saving Technology label on the back of your device Saving electricity is easy Simply press the Power Saving key: If the furnace is not being used in the firing...

Additional characteristics • Compact, ergonomie design • Large cooling tray • Proven furnace head swivel mechanism • Fast re-start due to quick cooling of the furnace head • Cost-effective operation due to long service life of the • Remote control by PC using the software PrograBase 2 • Language-independent operation by means of symbols • Electronic Vacuum Control System (EVCS) • Special investment ring cooling grid for optimum cooling • Dehumidification and maintenance program for the heating muffle

Technical Data Power connection Data for the vacuum pump Dimensions of electrical fuses Dimensions of the closed furnace Usable size of the firing chamber Safety notes Radio protection / electromagnetic Delivery form - Power cord - Vacuum hose - Programat Firing Tray Kit - Automatic Temperature Checking Set Acceptable voltage fluctuations ±10% Final vacuum: < 50 mbar Use only tested pumps Graphic LCD Display with background lighting Width: 305 mm/410 mm (with cooling tray) Furnace base: 12.0 kg, furnace head: 7.0 kg The furnace was built in accordance with the following standards - Cooling grid...