Catalogs >
Ivoclar Vivadent >
Programat S1

Programat S1
1 / 8Pages

Catalog excerpts

The exceptional sintering furnace Sintering ZrO2 restorations has just become faster

Faster and more efficient Sintering of IPS e.max ZirCAD crown copings in just 75 minutes Short sintering process saves a lot of time Sintramat Time Approx. 64 % less energy consumption Programat S1 Conventional sintering furnace (Sintramat) 1.35 kwh Energy consumption in kW/h 3.8 kwh The Programat S1 (as of software V 2.0) sinters restorations in significantly less time than conventional sintering furnaces. Until now, this process lasted five to eight hours. The new Programat S1 reduces the time required for sintering an IPS e.max ZirCAD crown coping to about 75 minutes. This translates...

Open the catalog to page 2

Comfortable and easy operation Graphics display and proven membrane-sealed keypad The user-friendly control panel features a graphics display screen which clearly shows all the information required. The furnace is easy to operate and program by means of the time-tested membrane-sealed keypad. OSD operating status display Standby The optical operating status display of the Programat S1 uses different colours to inform the user about the actual operating status of the furnace. The status of the unit is visible even from a large distance. Easily accessible sintering chamber The furnace head...

Open the catalog to page 4

Many programming options As the sintering program involves three temperature levels, there are a host of programming options. Consequently, a wide variety of materials (even translucent ZrO2 materials of the latest generation) can be sintered. Removable furnace head The furnace head can be detached from the base of the unit for transport and maintenance purposes. As a result of this feature, the furnace is very easy to maintain. Calibration option This sintering furnace can be calibrated. Therefore, the sintering temperature can be checked at any time and adjusted if necessary. USB port The...

Open the catalog to page 6

Technical data Power supply 118–240 V 50–60 Hz Overvoltage category II Tolerated voltage fluctuations ±10 % Dimensions of closed furnace Depth: 430 mm Width: 310 mm/420 mm (including cooling tray) Height: 570 mm Furnace base: 10 kg Furnace head: 17 kg Safety information The furnace has been built according to the following standards: Radio protection / electromagnetic compatibility Delivery form 1 Basic unit 1 Sinter tray 1 Sinter tray tongs 1 S1 Temperature Checking Set Starter Kit 1 Power cord 1 Warranty Certificate 1 Operating Instructions 1 Service Passport Colour: White (RAL 9016) This...

Open the catalog to page 8