*mymedicalexpo

Zenotec mini

Product catalog summary

Introduction
The document introduces the Zenotec mini, a compact milling system designed for dental laboratories to enter the digital fabrication world efficiently. It highlights the system's capabilities in handling a wide range of materials and its integration into the digital workflow.

Specifications
The Zenotec mini features a 4-axis simultaneous milling protocol, a high-frequency spindle for precision, and a 6-position tool changer for flexibility. It supports materials like zirconium oxide, acrylic resin, and wax, and is capable of producing bridges with up to 14 units.

Materials
The system supports a variety of materials including Zenostar®, Zenotec® Zr Bridge, Telio® CAD for Zenotec, Zenotec® PMMA Cast, Zenotec® Model, and ProArt Wax Disc for Zenotec. These materials cover a broad spectrum of dental indications.

Digital Workflow
Ivoclar Vivadent offers a comprehensive CAD/CAM system for both fixed and removable prosthetics, providing dental laboratories with coordinated products and services for optimized workflows. The system includes scanners, materials, and equipment, enhancing productivity and flexibility.

Technical Specifications
The Zenotec mini has dimensions of 40 x 42 x 38 cm and weighs 45 kg. It operates with a precision ball-screw spindle drive, reaching up to 60,000 rpms. It requires a power supply of 230 V / 50 Hz / 2 A and a compressed air connection of at least 7 bar.

Conclusion
The Zenotec mini milling system is a high-tech, compact solution for dental laboratories, offering efficiency, precision, and flexibility in digital dental fabrication. It is supported by a robust range of materials and a comprehensive digital workflow system.

Catalog excerpts

WIELAND ZENOTEC mini The compactmillingsystem Your entrance into the • ■ ivoclar '■ vivadenl: passion vision innovation digital world

Open the catalog to page 1

Customized digital solutions for every laboratory Preparing Material Selection Ivoclar Vivadent offers an extensive CAD/CAM system for fixed and removable prosthetics that comprises products and services for the entire digital processing chain. Dental laboratories have a wide choice of fully coordinated products including scanners, materials and equipment. The system is complemented by a comprehensive range of services. As a result dental laboratories benefit from optimized workflows and maximum productivity and flexibility. WIDE RANGE OF MATERIALS The Zenotec mini system features coordinated...

Open the catalog to page 2

Glatte Oberﬂächen The compact milling system High-tech does not have to be supersized. The very compact Zenotec mini milling system simply beams with efficiency and quality. It enables dental laboratories to make a professional entrance into digital fabrication. Switch on and get started! Optimierte Biegefestigkeit & Alterungsbeständigkeit Sehr hohe Lichttransmission Sicherer Haftbund Glatte Oberﬂächen Digitale Zahntechnik oﬀene Datenausgabe Variable Farbschemata Dichte und homogene Mikrostrukturen Variable Schichtschemata Abgestimmtes Komplettsystem UNIVERSALITY AND FLEXIBILITY DUE TO hochwertige...

Open the catalog to page 3

DIGITAL PRESS PROCESS Zenotec mini is ideally adjusted to the processing of the ProArt Wax Disc for Zenotec Yellow. This wax disc was especially optimized for the pressing technique and thus enables the efficient high-precision fabrication of wax components that are subsequently invested and pressed. The machining of IPS e.max® Press restorations is optimized with the „Digital Press Design“ software add-on. This innovative CAD software automatically positions the sprues. As a result, the combination of Zenotec mini, the Programat® press furnaces and IPS e.max Press permits the fabrication of...

Open the catalog to page 4

TECHNICAL SPECIFICATIONS Dimension in cm (w x h x d) Milling stations Type of drive (maintenance-free) Precision ball-screw spindle drive Spindle (rpms) Tool positions Voltage/frequency/ power requirement Nominal output Remote maintenance Zirconium oxide, acrylic resin, wax Bridges with up to 14 units, depending on the material Automatic tool measurement with breakage detection Automatic numerical control of all 4 axes Zenotec® mini

Open the catalog to page 5

Ivoclar Vivadent offers an extensive CAD/CAM system for fixed and removable prosthetics that comprises products and services for the entire digital processing chain. Dental laboratories have a wide choice of fully coordinated products including scanners, materials and equipment. The system is complemented by a comprehensive range of services. As a result dental laboratories benefit from optimized workflows and maximum productivity and flexibility. LEARN MORE: • ■ ivoclar ’■ vivadenl: passion vision innovation Manufacturer: Distributor: Wieland Dental+Technik GmbH & Co. KG www.ivoclarvivadent.com/distributoren...

Open the catalog to page 6

All Ivoclar Vivadent catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list