*mymedicalexpo

Catalogs
Jiangsu Aegean Technology
AG-IIR003 Infant Incubator With Humidity Control System

AG-IIR003 Infant Incubator With Humidity Control System

Product catalog summary

Product Overview
The document provides detailed specifications and features of the Infant Incubator with Humidity Control System, model AG-IIR003, designed to facilitate medical care for infants.

Function Features

Microprocessor-based servo-controlled temperature system with air and baby skin modes.
Humidity display system with separate LED displays for set temperature, air temperature, baby skin temperature, humidity, timer, and heating power.
Integral timer for recording therapy time and self-testing function with audible and visual alarms for various failures.
Alarm functions include power failure, over temperature, temperature deviation, fan failure, and temperature sensor failure.
Features a >37° temperature set function and triple protection for over temperature with a separate cut-off device for enhanced safety.
Adjustable inclination of the infant bed, single wall hood with multiple operating windows and ports, and an independent locking device for the front door.
Includes RS232 connector, oxygen inlet, and a tray.

Technical Data

Transport and storage dimensions and weights are specified for the control unit, cabinet, and hood.
Environmental conditions for operation include temperature range from -10°C to +70°C and relative humidity ≤80%.
Power supply requirements are AC110/220V 60/50Hz with a power input of 650VA.
Temperature control ranges for air and skin, with specified accuracy and fluctuation limits.
Additional specifications include warm-up time, internal noise level, infant bed tilt angle, mattress size, trough capacity, and air filter specifications.

Operating Conditions

Optimal environment temperature is 20°C to 30°C with relative humidity between 30% and 75%.
Environment air velocity of flow should be less than 0.3m/s.

Additional Features

Includes infusion hook, tray, hand wheel, handle, main operation panel, draw, base, wheel, support locking plate, and constant temperature hood.

Catalog excerpts

AG-IIR003 Infant Incubator With Humidity Control System-1

Make the medical care easier Infant Incubator With Humidity Control System Global B2B Marketplace Focused on the Supply and Procurement of Medical Equipment and Devices ｗ

Open the catalog to page 1

AG-IIR003 Infant Incubator With Humidity Control System-2

Product Data Sheet Make the medical care easier Baby Incubator Function features Microprocessor based servo controlled temperature system Control modes: Air mode and baby skin mode Humidity display system Set temperature, air temperature, baby skin temperature, humidity, timer and heating power are displayed separately by LED Integral timer to record therapy time Self -testing function, various failure alarms by audible and visual Alarm function: Power failure, Over temperature, Temperature deviation,Fan failure, Temperature sensor failure >37° temperature set function Triple protection for over...

Open the catalog to page 2

AG-IIR003 Infant Incubator With Humidity Control System-3

Product Display Technical data Power supply Power input Make the medical care easier Environment temperature Operating condition Environment relative humidity Air temperature control range Skin temperature control range Skin temperature sensor accuracy Temperature ﬂuctuation Uniformity of mattress temperature Warm-uptime(from25°C) Internal noise level Infant bed tilt anglel Mattress size Trough capacity Each unit is packed in two plywood cases (control unit and cabinet): 112*66*98cm N.W.:80Kg Environment temperature Atmospheric Pressure Environment relative humidity ≤80% Standard conﬁguration...

Open the catalog to page 3

AG-IIR003 Infant Incubator With Humidity Control System-4

Make the medical care easier

Open the catalog to page 4

AG-IIR003 Infant Incubator With Humidity Control System-5

Project Display Make the medical care easier COOPERATE BRANDS

Open the catalog to page 5

All Jiangsu Aegean Technology catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list