*mymedicalexpo

JC35D

Product catalog summary

Specifications:
The JC35D linear actuator is available in various load thrust capacities: 6000N, 4000N, 3000N, 2000N, 1500N, 1000N, and 750N. It comes in gray (RAL7035) and black (RAL9005) colors, with a maximum IP grade of IP43. The motor operates at 24VDC. Stroke lengths vary by load capacity, with a range of 50-600mm. Installation lengths are determined by stroke length, with specific formulas provided for different stroke ranges.

Features and Options:
The JC35D is designed for low noise and high reliability, suitable for thrust applications, particularly in beds. It has a noise level of ≤48dB under no load. Optional features include a Hall sensor, reed switch, and electronic limit switches. The actuator is flame retardant (UL94-HB) and weighs approximately 1.5kg, depending on stroke and retracted length.

Technical Parameters:
The actuator has a duty cycle of 10%, allowing for 2 minutes of continuous operation followed by 18 minutes off. It operates within a temperature range of 5~40℃ and can be stored between -10~50℃. It supports a relative humidity of 20% - 90% at 25℃, non-condensing, and an atmospheric pressure of 700-1060hPa. It is compatible with Jiecang standard controllers.

Certification:
The JC35D complies with IEC60601-1:2012, EN60601-1:2006+A12:2014, and ANSI/AAMI ES60601-1:2005(R) 2012 standards.

Ordering Key:
The ordering key includes model, optional features, load capacity, speed at full load, input voltage, stroke/retracted length, clevis direction, actuator color, end clevis specification, end clevis material, top clevis specification, brake specification, plug and cable, and cable length.

End Clevis and Top Clevis Specifications:
Detailed specifications for end and top clevis are provided, including dimensions and materials.

Motor Cable and Controller Compatibility:
The actuator uses a 4-pin or 5-pin actuator plug, with specific pin functions detailed. It is compatible with several Jiecang controllers.

Performance Diagrams:
Graphs illustrate the relationship between current and load, and speed versus load, providing insights into performance under different conditions.

Catalog excerpts

TECHNOLOGY DRIVES INTELLIGENT LIFE

Open the catalog to page 1

Data sheet JC35D is small and low-noise with simple design and high reliability. It has the following configuration: JC35D-6000N; JC35D-4000N; JC35D-3000N; JC35D-2000N; JC35D-1500N; JC35D-1000N; JC35D-750N. It is mainly used in thrust applications; JC35D is widely used in all kinds of beds. • Noise level: non load<48dB, ( environmental noise<40dB) • Only push no pull: optional • Hall sensor: optional • Reed switch: optional • Built-in electronic limit switches • Weight: About 1.5kg (different stroke/ retracted length with different weight ) • Static bending moment: lateral load are not allowed...

Open the catalog to page 2

Usage • Duty cycle: 10%, max 2 min continuous working and 18 min off • Operating temperature: 5~40°C • Storage temperature: -10~50C • Supporting controller: it can be matched with Jiecang standard controller. * Relative humidity: 20% - 90% at 25 C, non condensing * Atmospheric pressure: 700-1060hPa Spindle Max. load Max. load Self-lock pitch push pull Typical speed Typical speed Typical Amp Unloaded full load full load

Open the catalog to page 3

05= The groove width is 6.5, the depth is 26, and the bore diameter is φ10.1 with φ24 aluminum tube. 08,09= Inner tube opening 14.2, hole distance from end face is 17, adding D-type top clevis pad, hole diameter φ10.1 adding D-type inner tube top clevis.

Open the catalog to page 6

1 =4pin actuator plug Matching controller: JCB35Q/JCB35T/JCB35R/JCB35R1/JCB35S/JCB35K2 4pin actuator plug (normal plug) 2=5pin actuator straight plug Matching controller: JCB35Q/JCB35T/JCB35R/JCB35R1/JCB35S/JCB35K2 5pin actuator straight plug (double hall sensor actuators)

Open the catalog to page 7