JC35DS
5Pages

Catalog excerpts

Data sheet

Data sheet Features • 24V DC permanent magnet motor • Thrust up to 6000 N in push and up to 3000 N in pull • Color: grey or black • Standard protection class: IP43 • The actuator can go up or down by crank after the power if off • Low noise; The average noise level is lower than 48dB (ambient noise is less than 40dB). • High-strength front and back fixtures • Certificate : CE Usage • Ambient temperature: +5 ° to +40 ° • Duty cycle: Max 10% or 2 minutes continues use followed by 18 minutes not in use • Matching control box: JCB35T

Open the catalog to page 2

Spindle Max. load Max. load Self-lock Typical speed Typical speed Typical Amp pitch push pull (N) Unloaded full load full load Comments to table • The above measures are made in connection with 24V DC stabilized voltage supply. • JIECANG control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s) when the actuator(s) are not running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) are not connected to a JIECANG control box, the terminals of the motor must be short-circuited to achieve the self-locking...

Open the catalog to page 3

Cable length Plug and cable Spindle typ End clevis material Mounting position End clevis Color Stroke / Retracted length Input voltage Speed at full load Load capacity Options Type

Open the catalog to page 5

JC35DS 5Pages

Catalog excerpts

All Jiecang Linear Motion catalogs and technical brochures

JC35DS
5Pages