*mymedicalexpo

JC35L10

Product catalog summary

Specifications:
The JC35L10 linear actuator is available with dynamic load push capacities of 3000N and 4000N, and a dynamic load pull capacity of 3000N. It features a gray or black shell with an IPX6 rating, a 24VDC motor, and a stroke length ranging from 100 to 400 mm (±4mm). The retracted length is calculated as the stroke length plus 185 mm. The noise level is ≤48dB, with environmental noise at ≤40dB. An optional safety nut and push-only function are available. Built-in electronic limit switches are included, and the weight is approximately 2 kg, varying with stroke/retracted length. The actuator does not allow lateral loads and has a flame retardant grade of UL92V-0.

Function and Options:
The actuator offers low noise operation, a maximum IP grade of IPX6, and a quick release function that allows for release and stop, with both positive and negative release options.

Features:
The duty cycle is 10%, with 2 minutes of use followed by 18 minutes of rest. It operates within a temperature range of 0 to 50°C and can be stored between -10 to 50°C. It supports controllers JCB35Q, JCB35T, JCB35T2, and JCB35R. The relative humidity should be 20% to 90% at 30°C, non-condensing, and atmospheric pressure should be between 700 and 1060 hPa. Certifications include IEC60601-1:2012, EN 60601-1:2006+A12:2014, and ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012.

Technical Specifications:
The maximum load is 4000N or 3000N, with self-locking load speeds of 5 to 6 mm/s. The spindle pitch is 5 to 6 mm, and the current at full load is 3 to 3.5 A. The input voltage is 24VDC.

Ordering Key:
The ordering key includes options for type, optional features, load capacity, speed at full load, input voltage, stroke/retracted length, mounting position, color, end clevis, end clevis material, top clevis, brake, plug and cable, and cable length. Specific configurations are detailed for each option.

Dimensions:
The actuator dimensions are specified with a retracted length of 335 mm and a stroke length of less than 400 mm. End clevis and top clevis specifications are provided for common use with loads between 1000-4000N.

Controller Connectors:
Dimensions and specifications for the JCB35T2 controller connector are provided.

Characteristic Curves:
Charts illustrate the relationship between current and load, and speed and load for both 3000N and 4000N configurations, across various voltages (24V, 29V, 32V, 36V).

Catalog excerpts

TECHNOLOGY DRIVES INTELLIGENT LIFE

Open the catalog to page 1

Data sheet Features • Low noise, max IP grade:IPX6, with quick release function • Quick release can achieve the effect of release and stop, positive and negative release Function and options • Dynamic Load push: 3000N&4000N • Dynamic Load pull: 3000N • Shell color: Gray / Black • IPgrade : IPX6 • Motor: 24VDC • Stroke length: 100-400 (±4mm ) • Retracted length: L=S ( Stroke length)+185 • Noise level: <48dB (Environmental noise: <40dB) • Safety nut: Optional • Only push no pull function: Optional • Built-in electronic limit switches • Weight: About 2kg(Different stroke/retracted length has different...

Open the catalog to page 2

Input Spindle voltage pitch Empty /load speed (mm/s) Current at full load

Open the catalog to page 3

End clevis speciﬁcations: 1000-4000N in common use Top clevis speciﬁcations: 1000-4000N in common use

Open the catalog to page 5

JC35L10 stroke and load relationship diagram 8

Open the catalog to page 8

JC35L10 characteristic curve chart(3000N) The relationship between current and load The relationship between speed and load Curent and Load Min Speed and Load Max

Open the catalog to page 9

JC35L10 characteristic curve chart(4000N) The relationship between current and load The relationship between speed and load Curent and Load Min Speed and Load Max

Open the catalog to page 10