*mymedicalexpo

JC35L11

Product catalog summary

Overview: The JC35L11 is a linear actuator designed for high load applications, particularly suitable for patient lifts. It offers a maximum thrust of 12000N and a pull of 6000N, with a robust design and safety features.

Specifications:

Load Thrust: Up to 12000N
Load Pull: Max 6000N
Color: Grey/Black with Red manual clevis
IP Rating: Max IPX6
Motor: 24V DC permanent magnet
Stroke Length: 0-350mm for 10000N, 0-200mm for 12000N
Noise Level: ≤50dB
Certifications: EN60601-1, UL60601-1

Features:

High load capacity and excellent IP rating
Low noise level
Safety nut to prevent unintended lowering
Electronic and mechanical limit switches
Manual lowering for emergencies
Built-in hall sensor

Options:

Compatible with JCB35K3 for patient lifters
Duty Cycle: 10%, continuous work for 2 minutes with an 18-minute pause
Operating Temperature: 5℃ to 40℃

Technical Specifications:

Self-locking load enhanced by control boxes short-circuiting motor terminals
Performance Data: Speed and current vary with load, detailed in performance graphs

Dimensions:

Standard and manual lowering dimensions provided for various stroke lengths

Ordering Information:

Includes options for color, mounting position, clevis type, and additional features like hall sensor and anti-pitch

Catalog excerpts

TECHNOLOGY DRIVES INTELLIGENT LIFE

Open the catalog to page 1

Data sheet JC35L11 has a maximum thrust of 12000N and a maximum pull of 6000N, providing a good solution for the patient lift. JC35L11 shows its superior performances in the aspect of high load capacity, excellent IP rating, low noise level as well as some safety features, among which are: • Brake to increase friction so that strengthen the selflocking ability. • Safety nut to avoid unintended rapid lowering due to the damage of the nut. • Electronic limit switches and mechanical limit. • Manual lowering to ensure nursing carers could lower the actuator when power supplier has been cut or other...

Open the catalog to page 2

Power Supply Spindle Self-Lock Load Speed at 0/ Full Load (mm/s) Current at Full Load (A) • When the actuators are not running, Jiecang's control boxes could short-circuit the motor terminals (electrodes). Such solutions give actuators higher self-locking load. • These data above are typical ones.

Open the catalog to page 3

Dimensions with standard top clevis L=260(S ≤50) L=S+210(S>50) 12 20

Open the catalog to page 4

Dimensions with manual lowering End Clevis Top Clevis 28= with slot 6, hole 12.5, H=horizontal 0° with bushing

Open the catalog to page 5

JC35L11 Speed VS Load 8 Speed (mm/s)

Open the catalog to page 7

Ordering Key Example JC35L11 X 10 5 24 300/590 H G B09 G F13 2 89 1D5 Cable length Plug and cable Brake Top clevis End clevis material End clevis Color Mounting position Stroke/Retracted lenght Input voltage Speed at full load Load capacity Optional feature Type 1D5=1.5m 1 = left 2=right F13=Od 28, no slotting, hole 10.1 G=Cast steel body B09=Slot width 8.1, slot depth 32, hole 12.5 G=Grey H=horizontal V=vertical 24V 5mm/s 10000N 0 standard Y Hall sensor option P Anti-pitch option X=Manual operation+Only push +Safety nut

Open the catalog to page 8