JC35L18
7Pages

Catalog excerpts

Data sheet JC35L18 has a maximum thrust of 8000N and a maximum pull of 4000N, providing a good solution for a variety of large load situations like ICU bed, dental chair and many others. JC35L18 shows its superior performances in the aspect of high load capacity, low noise level as well as some safety features, among which are: • Brake to increase friction so that strengthen the selflocking ability, avoiding sudden motion. Features • Load thrust up to 8000N • Max. load pull 4000N • Color: Grey /Black • Max IP rating: IPX6W • 24V DC permanent magnet motor • Stroke length:50-500mm(±2mm)8000N...

Open the catalog to page 2

Power Supply Spindle Max.Load Static Load Stroke speed at Current Pitch Push Length 0/Fu11 Load at Full Load • When the actuators are not running, Jiecang's control boxes could short-circuit the motor terminals (electrodes). Such solutions give actuators higher self-locking load. • These data above are typical ones.

Open the catalog to page 3

Dimension（Only push no pull）

Open the catalog to page 4

Installation dimensions

Open the catalog to page 5

JC35L18 Speed VS Load 10 Speed(mm/s)

Open the catalog to page 6

Cable length Plug and cable Brake Top clevis End clevis material End clevis Color Mounting position Stroke/Retracted lenght Input voltage Speed at full load Load capacity Optional feature Type 1D0=1M 1 = left 2=right options(F08/F09/F14) L=aluminum alloy B04=Slot width 8, slot depth 30, hole 10.1 (options B08, steel) G=Grey H=horizontal V=vertical 24V 3mm/s 8000N 0 standard Y Hall sensor option P Anti-pitch option

Open the catalog to page 7

JC35L18 7Pages

Catalog excerpts

All Jiecang Linear Motion catalogs and technical brochures

JC35L18
7Pages