*mymedicalexpo

JC35L9

Product catalog summary

Overview: The JC35L9 is a new actuator in the L series, specifically designed for medical bed systems. It offers a low noise level and can exert a thrust of up to 6000N, with a speed of 4mm/s at full load. The actuator is equipped with a safety nut, making it a reliable choice for medical applications.

Specifications:

Maximum load thrust: 6000N
Maximum load pull: 4000N
Motor: 24V DC permanent magnet
IP Grade: Max. IPX6
Noise level: ≤48dB
Built-in electrical limit switches
Short stroke length options: 50-250mm for 6000N, 50-500mm for 4000N
Certifications: CE, UL

Features:

Hall Sensor
Only Push
Reed switch option

Options: Compatible with control boxes JCB35E, JCB35Q, JCB35T, JCB35R. Duty cycle is 10%, allowing continuous work for up to 2 minutes with an 18-minute pause. Operating temperature ranges from 0 to +50°C, with storage temperatures between -10 to +50°C.

Technical Specifications: The actuator operates with a 24V DC stabilized voltage supply, providing higher self-locking load due to short-circuiting motor terminals when not in use.

Dimensions: The installation dimensions vary based on load capacity and stroke length, with specific measurements provided for both 6000N and 4000N capacities.

Performance Data: Graphs illustrate the relationship between speed and load, as well as current and load, for the JC35L9 actuator.

Ordering Information: An example ordering key is provided, detailing options for mounting position, color, clevis material, and additional features such as Hall sensor and anti-pitch options.

Catalog excerpts

Data sheet JC35L9 is a brand new actuator of L series. It is mainly designed for medical bed system to control bed status. It has a low noise but could thrust up to 6000N. Faster speed at full load, reaching 4mm/s. Equipped with safety nut, JC35L9 is a safety choice. With a smooth and concise appearance, JC35L9 provides medical bed system with better solutions. Features • Load thrust up to 6000N • Max. load pull 4000N • 24V DC permanent magnet motor • IP Grade:Max.IPX6 • color: Black/Grey • Noise levelc<48dB (ambient level<40dB) • Electrical limit switches : built-in • Safety Nut • Short stroke...

Open the catalog to page 2

Spindle Max. load Max. load Self-lock Typical speed Typical speed Typical Amp pitch push pull Unloaded full load full load Comments to table • The above measures are made in connection with 24V DC stabilized voltage supply. ' • When the actuators are not running, Jiecang’s control boxes could short-circuit the motor terminals (electrodes). Such solutions give actuators higher self-locking load.

Open the catalog to page 3

Installation dimensions

Open the catalog to page 4

JC35L9 0 6 4 24 100/27 5 H G 02 G 0 9 2 02 1D5 Cable length Plug and cable Brake Top clevis End clevis material End clevis Color Mounting position Stroke/Retracted lenght Input voltage Speed at full load Load capacity Optional feature Type G=Cast steel body 02=slot width 10, slot depth 32, hole 10.1 G=Grey H=horizontal V=vertical 24V 4mm/s 6000N 0 Standard Y Hall sensor option P Anti-pitch option R Reed switch option

Open the catalog to page 7