JC35M4
5Pages

Catalog excerpts

TECHNOLOGY DRIVES INTELLIGENT LIFE

Data sheet • 24V DC permanent magnet motor • Thrust up to 10000 N in push and up to 10000 N in pull • Color: grey • Standard protection class: IP66 • Max push 10000N, Manual operation in case of emergency • Used for patient lift * The average noise level is lower than 50dB (ambient noise is less than 40dB). • Built-in electronic limit switches • Certificate : CE Options • Hall sensor feedback: optional • Only push no pull function: optional • Manual operation: optional Usage • Max 10% or 2 minutes continues use followed by 18 minutes not in use • Ambient temperature:+5 0 to+40 0 • Matching...

Open the catalog to page 2

Spindle Max. load Max. load Self-lock Typical speed Typical speed Typical Amp pitch push pull (N) Unloaded full load full load Comments to table • The above measures are made in connection with 24V DC stabilized voltage supply. • JIECANG control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s) when the actuator(s) are not running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) are not connected to a JIECANG control box, the terminals of the motor must be short-circuited to achieve the self-locking...

Open the catalog to page 3

Cable length Plug and cable Brake Top clevis End clevis material End clevis Color Mounting position Stroke/Retracted lenght Input voltage Speed at full load Load capacity Optional feature Type 1D5=1.5m 0=no1=left 2=right A=No slot, (|>10.1 G=Cast steel one A=No slot, <|> 10.1 G=Grey H=horizontal V=Vertical 24V 3.5mm/s 10000N Y Hall sensor P Anti-pitch

Open the catalog to page 5

JC35M4 5Pages

Catalog excerpts

All Jiecang Linear Motion catalogs and technical brochures

JC35M4
5Pages