High Frequency Portable X-ray Unit We proudly release the small sized and light weighted monobloc model, still having a high output by the improved 2 kW inverter system together with the x-ray tube of 20 kHU. output of Max. 100 kV and Max. 30 mA is obtained by the 2kW inverter system. and mAs selectors adopted a rotary switch system for easy and quick selection of kV and mAs. switch stores 8 examination parts and corresponding exposure data (kV/mAs) in order to avoid an annoyance from refering these data to the radiographic chart every time. connector for DR system compatibility. (8P RJ-45) mAs control technique keeps always a real kV selected on the panel in order to obtain an expected film result even at the place where a certain drop of the line voltage occurs by the high impedance such as from the use of an extremely long extensi

High Frequency Portable X-ray Unit 40-100 kV (in 2 kV step). Rotary switch for digital display with 7 segment LED. X-ray tube a) Focal spot: 1.2 x 1.2 mm b) Anode heat storage capacity: 20 kHU c) Target angle: 16 degrees Total filtration A field lamp with a 30 sec. timer and cross indication line. A crossing point of 2 laser beams makes it easy to confirm a center of a radiographic field and exact SID even under the sunlight. Line cable Hand switch Two stage, deadman type with curled cable. (3 meter long at full extension) X-ray unit: 8.8 kg or 19.4 lbs Carrying case: 4 kg or 8.8 lbs Line voltage...