INSTRUCTION MANUAL C10P159-C10P164 . Rev A . 30-06-2023. This manual MUST be given to the user of the product. Read this manual BEFORE using this product, and keep it for future reference. The information contained in this document is non-contractual and subject to change without notice. The photos shown in this manual are not contractual.

INTRODUCTION This user manual contains important information about the handling of the Joëlette Finisher. In order to ensure safety when using the product, read the user manual carefully and follow the safety instructions. If you find that the font size in the print version of the user manual is difficult to read, you can download the pdf from the website www.joeletteandco.com. The pdf can then be scaled on screen to a font size that is more comfortable for you. Only use the Joëlette Finisher when it is in perfect working order. Otherwise, you might put yourself and others at risk. The following...

WARRANTY The Joëlette Finisher comes with a two years warranty. The Joëlette Finisher must be used in strict accordance with the intended use, maintenance and service requirements as set out in this document. Risk of accident and loss of warranty if maintenance is insufficient (page 16). The availability of spare parts is limited to 5 years. For reasons of safety and in order to avoid accidents which result from unnoticed wear, it is important that the Joëlette undergoes a multiannual inspection and minimum once every year under normal operating conditions. Under regular operating conditions,...

HOW TO OPERATE THE JOËLETTE FINISHER Driving the Finisher Joëlette requires a good level of physical fitness to ensure the safety of the passenger while moving the machine. However, it is not only reserved for «great sportsmen» and women, and can also be practised in a «jogging» spirit on easier routes. Driving the Finisher Joëlette is technical and requires a learning phase. For a comfortable driving position, position the handlebars at pelvic level. THE PASSENGER On the Finisher Joëlette, he feels everything! They have to tell their team-mates if they feel any discomfort. Riding a Finisher...

INSTALLATION OF THE PASSENGER ON THE JOËLETTE FINISHER TRANSFER Transferring the passenger onto the Finisher Joëlette is made easier because the seat is at standard wheelchair height. Make sure that the Joëlette is in a fully stabilised position. The parking brake must be activated. The companion helps the passenger into the seat. • One of the two front arms can be retracted for independent lateral transfer from the wheelchair to the Finisher Joëlette. • If the passenger is unable to get into the Joëlette on their own, the companions will help them by positioning themselves on one side of the...

• Attach the feet to the footrests using the Velcro straps supplied. • Use the knob to adjust the headrest to the correct height (resting against the back of the user’s neck). If the headrest is incorrectly positioned, a collision could cause the neck to hyperextend. Tighten the handle securely once the headrest has been adjusted. COMFORT Make sure the passenger is as comfortable as possible from the outset: • By adjusting the footrest and headrest as required. The inclination of the backrest can also be adjusted using the quick-release handles on either side of the seat (from 100° to 111°)....

SECURITY INSTRUCTIONS CHOICE OF TRAILS Before setting off on your Finisher Joëlette, you need to plan the route you are going to take. The Joëlette Finisher is only suitable for use on smooth, flat terrain (cycle paths, tarmac, greenways, forest tracks, etc.). THE TEAM • Only one person is needed to guide the Finisher Joëlette. Additional guides can take over the driving, depending on the difficulty of the route, the driving experience of the drivers and the weight of the passenger. • Pilots who are physically able to take on the role of driving the Joëlette Finisher. • Be careful not to overestimate...

• Repair equipment for the Joëlette (adapted tools, spare inner tube or «repars vite» spray for the wheels, etc.), small breakdown equipment (straps, turnbuckles, etc.). • For the passenger, who can quickly be in a sensitive position with regard to the cold, bring warm clothing. Don’t forget to protect extremities (gloves, hat, etc.) and, if necessary, take a protective cover against the cold («extreme cold cover»). Don’t forget to take a poncho-type rain protector, which can also be used to protect the passenger and the Joëlette Finisher’s equipment (cushions, headrests, etc.). DURING THE TRIP...

EXPLODED VIEW OF THE JOËLETTE FINISHER SIZE 42

EXPLODED VIEW OF THE JOËLETTE FINISHER SIZE 48

UNFOLDING THE JOËLETTE FINISHER 1. Take the Joëlette Finisher out of the bag (optional) and place it on the ground with the handlebars up. 2. Grasp the handlebars and place them in their housing. 3. Remove the two safety pins. Then insert the two handlebar arms into the sockets provided on the 4. Loosen the handlebar quick-release levers to adjust the handlebar to the correct height. 5. Retighten the quick-release levers. chassis. Finally, replace the safety pins.

6. Tilt the footrest forward as far as it will go (be careful not to trap fingers/hands). 7. Lock the footrest using the buttons. 8. Insert the disc of each wheel between the brake pads. 9. Insert the ball spindles until they lock (check that they lock by pulling on the wheel).

12. Lock each armrest 15. Tilt the quick-release lever once you have chosen the backrest angle. 13. Unscrew the knurled pins on the armrest. 14. Fit these pins into the backrest plates and screw into the quick-release lever. 16. Insert the front wheel into the fork. To dismantle, proceed in reverse order, taking care not to jam or pinch hands or fingers on moving parts. When dismantling/bending, take care not to pinch or bend the brake hose(s). A video is available on our website 17. Then tighten it using the quick-release lever. 11. Insert the front of the armrest into the frame.