iFS® Advanced Femtosecond Laser Specifications For Site Preparation/Installation Recommended Room Requirements • Minimum requirement: 10 ft x 10 ft (3048 mm x 3048 mm) • Ambient temperature: 67° F to 73° F (19° C to 23° C) (stable 24 hours a day) • Humidity requirement: Relative humidity between 35% to 65% (non-condensing) • The line voltage should be tested upon installation to ensure proper operation and should not vary by more than ± 10 % from nominal • Line Condition 120 VAC, 60 Hz 100 VAC, 50 Hz to 60 Hz 220-240 VAC, 50 Hz to 60 Hz o Dedicated AC line required prior to system installation (Laser UPS on electrical line connected to one breaker at panel) • Independent thermostat, controlling laser room only, required prior to system installation • High-speed Internet connection with static IP address required prior to system installation Delivery system shown in the retracted position. INDICATION: The iFS® Laser is a precise ophthalmic surgical laser indicated for use in patients undergoing surgery or other treatment requiring initial lamellar resect

System Specifications • Dimensions and Weight: o Height: 60 in (152 cm) o Width: 47 in (119 cm) o Length: 41 in (104 cm) o Weight: 865 lbs (392 kg) • Laser Type: Mode-locked, diode-pumped Nd: glass oscillator with a diode-pumped regenerative amplifier • Pulse Repetition Rate: 150 kHz • Laser Pulse Duration: 600 fs to 800 fs (±50 fs) • Maximum Laser Pulse Peak Power: 4.2 mW (±0.8 mW) • Central Laser Wavelength: 1053 nm • Remote Interlock: Yes • Beam Delivery Device Height: o Minimum 32.5 in (82.5 cm) (floor to applanation lens) o Maximum 42.5 in (104 cm) (floor to applanation lens) • Chair Selection...