Catalogs >
Jorgensen Laboratories >
Buster ICU Cage

Buster ICU Cage
1 / 2Pages

Catalog excerpts

The BUSTER ICU Cages are collapsible They are portable and can be set up in the prep, room or appropriate site They fit standard stainless steel kennels They allow for the provision of oxygen They allow for the provision of heat They also allow for the cooling of animals Can be used as anaesthetic chamber provided a co-axial circuit is used Remove all the packaging and check the components 1 X mat (see sheet BUSTER Kennel Mats) BUSTER Gel pack(s) small - 1, medium -2, large -4, (see sheet for Activation of Gel Pack) Oxygen accessories pack 6 X Venturi, nebulizer, T piece, cap 2.1 m oxygen tubing Jorgensen Laboratories • 1450 N. Van Buren Avenue, Loveland, Colorado 80538 • info@jorvet.com • www.JorVet.com

Open the catalog to page 1

Follow the assembly instructions detailed below Once assembled, place the animal in the BUSTER ICU Cage. The front zipper can be closed or left slightly open for drip lines. Attach the T piece to the port on the BUSTER ICU cage. Attach the cap to the other end of the T piece Attach the appropriate Venturi or nebuliser (see Use of Oxygen sheet) to the down arm of the T piece Attach the oxygen tubing to the end of the Venturi or nebuliser. Attach the other end of the oxygen tubing to the blank Venturi Attach the blank Venturi to outlet port on your anaesthetic machine. Turn on the oxygen...

Open the catalog to page 2