Catalog excerpts
KARL STORZ Uterine Manipulators For Gynecological Laparoscopy
Open the catalog to page 1KECKSTEIN Uterine Manipulator With the new KECKSTEIN uterine manipulator, you no longer need to decide which uterine manipulator is right for the next intervention. The KECKSTEIN uterine manipulator can be used for all gynecological laparoscopic interventions for benign indications, including chromopertubation. This manipulator allows an anteversion of 95° and a retroversion of 30°, whereas the angulation is locked steplessly. Here the cap can be angled together with the working insert to achieve greater mobility of the uterus and a precise view of the rectovaginal septum. The KECKSTEIN...
Open the catalog to page 2Cap, diameter 32 mm, length 30 mm Spiral Insert, diameter 15 mm Seal Working Insert, diameter 6 mm, length 40 mm Optional Accessories for Hysterectomy: 26168ZE Spiral Insert, diameter 12 mm Working Insert, diameter 6 mm, length 30 mm Working Insert, diameter 6 mm, length 80 mm Optional Accessories for Chromopertubation: Working Insert, for chromopertubation, diameter 3 mm, length 50 mm Optional Accessories for Organ-Preserving Surgery: Working Insert, atraumatic, diameter 5 mm, length 40 mm Working Insert, atraumatic, diameter 5 mm, length 90 mm
Open the catalog to page 3SCHÄR Manipulator Sacrocolpopexy is a standard surgical procedure used to treat various forms of prolapses characterized by a descensus of the vaginal vault or uterus. KARL STORZ now offers a multifunctional manipulator that has been specially designed for laparoscopic prolapse surgery. This enables the following operations to be performed without having to change instruments: • Supracervical hysterectomy Sacrocervicopexy surgery after supracervical hysterectomy Sacrocolpopexy of the vaginal stump after a previous hysterectomy Sacrohysteropexy (sacrocolpopexy with uterine preservation) When...
Open the catalog to page 4Working Element Working Insert Cleaning Adaptor SCHÄR Manipulator including: Handle, incl. cleaning adaptor Working Element Working Insert View of the vaginal stump after a previous hysterectomy. Mesh fixation during sacrocervicocolpopexy following a LASH procedure.
Open the catalog to page 5Uterine Manipulator, CLERMONT-FERRAND model The CLERMONT-FERRAND model uterine manipulator enables the manipulation and removal of the uterus in Total Laparoscopic Hysterectomy (TLH). Inserts available in various sizes allow adjustment to various anatomic conditions. Five lock-in positions between 0° and 90° enable deflection of the working insert and thus allow greater mobility of the uterus. A special sealing system reduces the leakage of distension gas through the vagina while it is opened. The instrument is autoclavable and can be fully dismantled. It can be used for all gynecological...
Open the catalog to page 6The following inserts are available in Set 26168D: Working Insert, conical, with thread, medium Working Insert, atraumatic silicone seals Working Insert, with connector for chromopertubation, atraumatic Optional Accessories: Working Insert, conical, with thread, short Working Insert, conical, with thread, long Working Insert, atraumatic, diameter 7 mm, length 60 mm Working Insert, with connector for chromopertubation, atraumatic, diameter 4 mm, length 60 mm Anatomical Blade, medium, diameter 36 mm, length 58 mm Anatomical Blade, long, diameter 36 mm, length 68 mm Attachment with Cap,...
Open the catalog to page 7HOHL Uterine Manipulator The HOHL uterine manipulator was specially developed for use in Total Laparoscopic Hysterectomy (TLH). Using a special spiral insert, the manipulator is tightly screwed into the cervical canal to provide tension on the uterus and to maintain a safe distance to the bladder. As an alternative to the spiral inserts, an optionally available manipulator rod with an atraumatic insert and grasper can be used to reduce bleeding in the cervix. To prevent possible gas leakage after laparoscopic opening of the vagina, ceramic caps in various sizes are available to match the...
Open the catalog to page 8Cap, diameter 28 mm, length 30 mm Spiral Insert, diameter 40 mm Atraumatic Insert, diameter 8 mm, length 45 mm Working Insert, diameter 6 mm, length 60 mm Optional Accessories: Working Insert, diameter 6 mm, length 40 mm Working Insert, diameter 6 mm, length 30 mm Spiral Insert, large, diameter 25 mm Atraumatic Insert, diameter 8 mm, length 45 mm Cap, diameter 28 mm, length 30 mm Manipulator Probe Hand wheel for opening/closing the grasper Manipulator Probe, with atraumatic working insert and grasper, for use with the HOHL Uterine Manipulator 26168K including: Working Insert, diameter 4 mm,...
Open the catalog to page 9TINTARA Uterine Manipulator The TINTARA uterine manipulator can be used for all indications in gynecological laparoscopy, except Total Laparoscopic Hysterectomy. As anteflexion of the uterus up to 90° as well as elevation is possible, it is suitable for the surgical treatment of endometriosis, for myoma enucleation or LASH (Laparoscopic Supracervical Hysterectomy). TINTARA Uterine Manipulator including: Handle Working Insert, size 4 mm, length 50 mm Working Insert, size 4.5 mm, length 50 mm Working Insert, size 4.8 mm, length 80 mm Tube Support Special Features: • Greater mobilization of...
Open the catalog to page 10Working Insert, diameter 4 mm, length 50 mm Working Insert, diameter 4.8 mm, length 80 mm Optional Accessories: Working Insert, diameter 4 mm, length 40 mm Pertubation Tube, with LUER-Lock Tube Connector 600008 Tenaculum Forceps, length 22 cm
Open the catalog to page 11MANGESHIKAR Uterine Manipulator The MANGESHIKAR uterine manipulator can be used for Total Laparoscopic Hysterectomy (TLH), Laparoscopic Supracervical Hysterectomy (LASH) and Laparoscopy-Assisted Vaginal Hysterectomy (LAVH). It can be fixed directly to the portio. Caps are available in five different sizes to minimize gas loss through the vagina after it is opened. The caps enable delineation of the posterior and anterior fornix which aids orientation while opening the vagina. Distal working inserts are available in eight lengths and can be adjusted to the size of the uterus. MANGESHIKAR...
Open the catalog to page 12Cap, diameter 28 mm, length 66 mm Working Insert, for chromopertubation, diameter 8 mm, length 50 mm Forceps Attachment Optional Accessories: Cap, diameter 23 mm, length 66 mm Cap, diameter 43 mm, length 66 mm Working Insert, for chromopertubation, diameter 8 mm, length 50 mm Working Insert, for chromopertubation, diameter 8 mm, length 60 mm It is recommended to check the suitability of the product for the intended procedure prior to use. Please note that the described products in this medium may not be available yet in all countries due to different regulatory requirements.
Open the catalog to page 13All KARL STORZ catalogs and technical brochures
-
Highlights
16 Pages
-
Adapted to your workflow: AIDA®
12 Pages