K816209
1Pages

Karrel Health Solutions S.r.l. Via Don Milani, 11 - 42020 Quattro Castella (RE) Tel. 0522 17 50 501 - Fax 0522 16 02 165 - Cod.Fisc./P.IVA e Reg. Impr.: 02672850357 web site: www.karrel.it - e-mail: info@karrel.it EMERGENCY TROLLEY IN TECHNOPOLYMER Technical features: CONSTRUCTION: solid, sturdy, made of technopolymer and epoxy powder-coated steel to obtain maximum lightness and maneuverability. DESIGN: accurate to the smallest detail. STRUCTURE: self-supporting, monocoque body. TOP: wide work top with rims in technopolymer without sharp edges to make it easy to clean and disinfect. Height from ground: mm1000 PUSH HANDLE: ergonomic, integrated on structure FRONT SIDE: it is pre-set to house a central locking system and modular drawers. Drawers are entirely made in technopolymer , with no sharp edges and rounded interior. They slide silently thanks to their ball bearing rails. They are equipped with end stoppers and are pre-set for central locking system. DEFIBRILLATOR HOLDER: Plexiglas tray (dim. mm390x320x20H) and stainless steel arm, 360° rotation and lockable every 10°. Supplied with two safety straps. I.V. POLE: made of stainless steel, height-adjustable. CPR MASSAGE BOARD: made of transparent Plexiglas and placed in front of the trolley. STANDARD DRAWERS: entirely realized in technopolymer: no.3 drawers dimensions mm 600x475x137H; no. 1 drawer dimensions mm 600x475x274H. LOCKING SYSTEM: seal locking system; no. 20 plastic disposable seals (cod. 617363) supplied with the trolley LEFT SIDE: additional, pull–out work surface in technopolymer; built-in compartment, complete with four shelves with rim entirely made of technopolymer. RIGHT SIDE: built-in compartment in plastic; no. 1 waste bin; no. 1 catheter or probe holder, no. 1 small shelf with rim entirely made of technopolymer. BACK SIDE: built-in compartment with oxygen cylinder holder and safety strap to hold it; no. 1 holding rail with hooks. WHEELS: no. 4 ball bearings, pivoting, anti-threads wheels diam. mm 125, two antistatic wheels and two with brake. BUMPER: all around bumper integrated in the base of the trolley Dimensioni: mm 820x640x1600H