video corpo

Burs catalogue - 28 Pages

Add to MyMedicalExpo favorites
Burs catalogue

Catalog excerpts

Jet Carbides Enduring esthetics. Effortless efficiency. Precisely.

 Open the catalog to page 4

Shank Type Code Shank Type Friction Grip Friction Grip Short Shank Friction Grip Long Friction Grip Oral Surgical Latch Short Shank Latch Oral Surgical Handpiece Long Handpiece Oral Surgical MATERIAL OF CUTTING SURFACE CARBIDE (DIAMOND, STEEL, ETC.) SHANK AND OVERALL LENGTH (HP, LA, FG, ETC.) SHANK AND OVERALL LENGTH (HP, LA, FG, ETC.) SHAPE AND TYPE OF FINISH (ROUND, CYLINDER, DIAMOND GRIT: MEDIUM, TOOTHING: COARSE, ETC.) NOMINAL SIZE (ISO 2157), LARGEST CUTTING HEAD DIAMETER IN 1/10MM

 Open the catalog to page 5

Operative Carbides Round Friction Grip (FG) Item N. Pcs 5 Short Shank (FGSS) Item N. Pcs 5 Latch (LA) Item N. Pcs 5 Item N. Pcs 100 Oral Surgical (FGOS) Item N. Pcs 5 Item N. Pcs 100 Handpiece (HP) Item N. Pcs 5 Pear Creates a preparation with converging walls and round internal line angles. Ideal for creating mechanical retention and maintaining full-length enamel rod margins on pit and fissure surfaces. FG 245 and FG 246 offer a longer head length and 329 329 331L 332 332 332 329 330 329 330 330 332 330 330 flat floors329 rounded internal line anglets. 331 with 331 331 331 331 Head Length...

 Open the catalog to page 6

Head Length Friction Grip (FG) Item N. Pcs 5 Short Shank (FGSS) Item N. Pcs 5 Head Length Diameter Friction Grip (FG) Item N. Pcs 5 Short Shank (FGSS) Item N. Pcs 5

 Open the catalog to page 7

Straight Fissure Straight Flat-End Fissure Creates a preparation with parallel walls and a flat floor. Useful for establishing the periphery of a preparation. Cross-Cuts increase cutting efficiency and facilitate cutting dentin at lower speeds for improved tactile response. Dome Ends create rounded internal line angles to distribute occlusal forces. FG 256 creates round internal line angles and a flat floor. Head Length Short Shank (FGSS) Item N. Pcs 5 Latch (LA) Item N. Pcs 5 Item N. Pcs 100 Straight Flat End X-Cut Fissure Head Length Friction Grip (FG) Item N. Pcs 5 Item N. Pcs 100 Short...

 Open the catalog to page 8

Straight Round End Fissure Head Length Straight Round End X-Cut Fissure Head Length Friction Grip (FG) Item N. Pcs 5 Handpiece (HP) Item N. Pcs 5 Item N. Pcs 100 Head Length Friction Grip (FG) Item N. Pcs 5

 Open the catalog to page 9

Head Length Friction Grip (FG) Item N. Pcs 5 Taper Flat End X-Cut Fissure 699 Head Length Friction Grip (FG) Item N. Pcs 5 Short Shank (FGSS) Item N. Pcs 5 Oral Surgical (FGOS) Item N. Pcs 5 Handpiece (HP) Item N. Pcs 5 Item N. Pcs 100

 Open the catalog to page 10

Taper Round End Fissure 1171 Head Length Friction Grip (FG) Item N. Pcs 5 Taper Round End X-Cut Fissure 1702 1172 1702 Head Length Friction Grip (FG) Item N. Pcs 5 Oral Surgical (FGOS) Item N. Pcs 5 Inlay Prep Head Length Friction Grip (FG) Item N. Pcs 5

 Open the catalog to page 11

Occlusal and Lingual Finishing Egg For contouring or placing anatomy on posterior occlusal surfaces. Also suitable for smoothing and shaping anterior lingual surfaces. Available in 12 and 30 blade-count configurations. Head Length Head Length Bullet Ideal for initial definition of fissures and anatomy in posterior teeth. Available in 12 and 30 blade-count configurations. Head Length Head Length Round Ideal for finishing anterior lingual and posterior occlusal surfaces. Available in 12 and 30 blade-count cutting heads. Head Length Diameter Diameter Friction Grip (FG) Head Length

 Open the catalog to page 12

Gingival and Labial Finishing Needle Establishes anatomical pits and fissures in occlusal surfaces. Available in 12 and 30 blade-count configurations. Head Length Head Length Flame Useful in establishing and defining pit and fissure anatomy. Available in 12 blade-count configuration. Head Length Friction Grip (FG) Item N. Pcs 5 Taper Finishing Ideal for trimming excess material on anterior labial surfaces or the cervical portion of any tooth. Available in 6, 12, 18 and 30 blade-count configurations, Needle point, Round End and Flat End shapes in multiple lengths to match any contouring...

 Open the catalog to page 13

Straight Finishing Ideal for any instance when a straight, smooth preparation margin is desired or when convenience demands a straight-bladed shape. Available in 12 and 30 blade-count configurations. Head Length Friction Grip (FG) Item N. Pcs 5 Inverted Taper Useful for obtaining a smooth surface on any preparation with converging preparation walls. Head Length Friction Grip (FG) Item N. Pcs 5 Item N. Pcs 100 Crown and Bridge Chamfer Ideal for removing excess composite from proximal margins and embrasures. Available in 12 blade-count configuration. Head Length Friction Grip (FG) Item N. Pcs 5

 Open the catalog to page 15

Fine Cross Cut Fine Cross-Cut burs feature traditional head shapes with maximum density cross-cuts in the bur blades to dramatically increase cutting efficiency while simultaneously decreasing undesirable chatter, friction and clogging. Perfect for rapid reduction or crown removal. The slightly roughened preparation surface is ideal for improving micromechanical retention in composite preparations. Fine Cross-Cut burs are available in a wide variety of shapes to meet every clinical situation. Head Length Diameter Friction Grip (FG) Item N. Pcs 5 Head Length Friction Grip (FG) Item N. Pcs 5...

 Open the catalog to page 16

Straight Fissure Head Length Short Shank (FGSS) Item N. Pcs 5 Straight Fissure Dome US Shape # Head Length Friction Grip (FG) Item N. Pcs 5 Item N. Pcs 100 Head Length Taper Flat End US Shape # Head Length Friction Grip (FG) Item N. Pcs 5 Item N. Pcs 100

 Open the catalog to page 17

Kriss Kross The unique pyramid-shaped geometry facilitates cutting through tough materials like amalgam and porcelain with ease. Available in Straight Fissure and Taper shapes. Head Length Head Length Solid Carbide The single-piece construction of our Solid Carbide burs improves strength and reliability. Simultaneously increases corrosion resistance. 1170 Head Length Short Shank (FGSS) Item N. Pcs 5 Latch (LA) Item N. Pcs 5 Item N. Pcs 100 Oral Surgical (FGOS) Item N. Pcs 100 Handpiece (HP) Item N. Pcs 5 Item N. Pcs 100

 Open the catalog to page 18

LA Axxess Drills Designed by Dr. L. Stephen Buchanan, the LA Axxess™ instruments optimise access preparations. The new LA Axxess diamond drill was designed for use with high-speed handpieces (FG) and makes the job even easier. Non-cutting parabolic tips ensure perfectly cut access preparations without ledges or irregularities and reduce the risk of file breakage. In straight canals, our instruments can be used for canal access to shape the coronal part in seconds. All the burs you need for initial access preparation are available in a single kit. 815-1400 LA Axxess Kit (Kit contains 2...

 Open the catalog to page 19

All KaVo Kerr Group catalogs and technical brochures

  1. Dexcam 4HD

    34 Pages

  2. HELIOS LED

    5 Pages

  3. UPHOLSTERY

    4 Pages

  4. Sprirt 3300

    4 Pages

  5. NX3

    2 Pages

  6. NTI Diamonds

    1 Pages

  7. Demi Ultra

    3 Pages

  8. KaVo OP3D Pro

    20 Pages

  9. OP2D

    8 Pages

  10. OP200 D

    9 Pages

  11. TempBond

    2 Pages

  12. X-Ray-Holders

    144 Pages

  13. PROGLOSS™

    2 Pages

  14. X-Ray Aprons

    2 Pages

  15. Demi Plus

    4 Pages