Catalog excerpts
ULTRASONIC TIP INTRODUCTORY KIT BUC TIPS* 973-0401 973-0406 SybronEndo’s Starter Tip Kit is the perfect entry for those starting to recognize the benefits ultrasonics can provide for their office. Each kit contains one: SP-2, Scaler, CT-4 and Diamond-Coated CT-4. The BUC-1 and BUC-1A can be used for gross dentin removal, moving access line angles, cutting a groove in the mesial access wall to drop into MB2 canals, and for quickly and carefully unroofing pulp chambers. Its radiused tip geometry also allows effortless entry into each canal orifice and facilitates the creation of a smoothly troughed surface, which is helpful in finding reclusive MB2s. Use at power level 1-3. 973-0402 BUC-2 973-0403 BUC-2A The BUC-2, with its disk-like radiused tip, can be used to smoothly and safely plane attached pulp stones from the pulp chamber floor without scoring it. In molars, it can be used to horizontally smooth the pulp chamber floor without cutting past it to get to the The CPR-1 is used for vibrating posts and cores and as an aid in crown and bridge removal. The autoclavable Tip Taxi is a convenient way to organize and protect up to six darker-colored dentin. The smaller version BUC-2A has a 1.0 mm diameter and can be used for corners of The CPR-2D has a contra-angled head and durable shape that provides enhanced energy for molar access prep and bicuspid access prep. Use at removal of core materials. It is also excellent for chasing calcified canals, uncovering hidden orifices, trephining around obstructions within the pulp chamber, and eliminating materials ultrasonic tips and a wrench. extending below the orifice. The working length is 17.0 mm. The BUC-3 and BUC-3A are extremely active instru- ments with sharp tips. They are used for chasing canals halfway up a root or for digging around a post Allows excellent vision and access while troughing around posts, chasing calcified canals, The annealed tip is configured similarly to the straight CT-4 type or carrier-based obturator to remove it. The water eliminating obstructions, and removing broken instruments. The three lengths provide tip but is not heat treated, so a doctor can bend it to the desired port is placed near the cutting surface of the tip for greater control by allowing the clinician to select an instrument according to safe access configuration. Use at low power levels. increased washing and cooling of the operative site. and depth of procedure. The working lengths are 17.0 mm for CPR-3D; 19.0 mm for CPR-4D; Use only at lowest power level. The scaler tip is used to break away cement or calculus. The ST is similar to the CT-4 except for its curvature for better access in difficult-to-reach areas within the tooth structure. Use at power level 4-6. The vibrator tip is designed to vibrate a post out, vibrate a crown These instruments are made of titanium alloy, which results in a smoother cutting action or bridge off or help seat a crown. Use up to power level 10. with less chatter, thereby increasing tactile sense. They are generally used in the mid and apical portion of the root with illumination and magnification. These instruments are end The Carr-Kanter back-action tip is used to reach tough areas such cutting only and are commonly used to ditch around broken files, aiding in their removal. as MB2 canals. Use at power level 1-2. At SybronEndo, we are known for our ultrasonic retroprep and microsurgical tips. Designed by Dr. Gary Carr, the original EIE/SybronEndo tips, perhaps more than any other product, have revolutionized the field of endodontic retreatment and surgical procedures. With our tips, the clinician is able to perform a wide variety of delicate endodontic procedures safely and efficiently. • Begin with the lowest setting on your ultrasonic unit and increase power using caution and clinical judgment. And whether you choose to use a microscope or not, the SybronEndo tips will • Review directions prior to usage. • Always use irrigation to avoid overheating. accommodate all situations gently, quickly and easily. 1717 West Collins Avenue, Orange, CA 92867 Tel 800.346.ENDO Tel 714.516.7979 Fax 714.516.7936 SybronEndo Europe, Databankweg 2a, NL-3821 AL Amersfoort, The Netherlands Tel +31 33 453 61 59 Fax +31 33 453 61 53 * BUC, KiS and CPR tips are available only in the United States. Visit us online at www.SybronEndo.com
Open the catalog to page 1ULTRASONIC TIP INTRODUCTORY KIT BUC TIPS* 973-0401 973-0406 SybronEndo’s Starter Tip Kit is the perfect entry for those starting to recognize the benefits ultrasonics can provide for their office. Each kit contains one: SP-2, Scaler, CT-4 and Diamond-Coated CT-4. The BUC-1 and BUC-1A can be used for gross dentin removal, moving access line angles, cutting a groove in the mesial access wall to drop into MB2 canals, and for quickly and carefully unroofing pulp chambers. Its radiused tip geometry also allows effortless entry into each canal orifice and facilitates the creation of a smoothly...
Open the catalog to page 2ULTRASONIC TIP INTRODUCTORY KIT BUC TIPS* 973-0401 973-0406 SybronEndo’s Starter Tip Kit is the perfect entry for those starting to recognize the benefits ultrasonics can provide for their office. Each kit contains one: SP-2, Scaler, CT-4 and Diamond-Coated CT-4. The BUC-1 and BUC-1A can be used for gross dentin removal, moving access line angles, cutting a groove in the mesial access wall to drop into MB2 canals, and for quickly and carefully unroofing pulp chambers. Its radiused tip geometry also allows effortless entry into each canal orifice and facilitates the creation of a smoothly...
Open the catalog to page 3SybronEndo’s MiniEndo is not simply a modified scaler or sonic unit. It is as capable of dislodging a stubborn metal post as it is able to perform delicate apical surgery. The MiniEndo is a powerful piezoelectronic unit controlled by a microprocessor that delivers a back and forth linear motion at the tip and constantly self-adjusts to provide a precise amount of power. The unit accepts all standard S-type threaded tips. Don’t be fooled by the small footprint – the MiniEndo is extra large on power and durability. Our surgical tips, designed by Gary Carr, include CT, UT and SJ sets. Surgery...
Open the catalog to page 4All KaVo Kerr Group catalogs and technical brochures
-
KaVo NOMAD™ Pro 2
8 Pages
-
CAD/CAM Solution Kit
2 Pages
-
Dexcam 4HD
34 Pages
-
LAMINATE & COUNTERTOP
4 Pages
-
ALLIANCE 1250 & 1258
4 Pages
-
HELIOS LED
5 Pages
-
PELTON PORTFOLIO
25 Pages
-
NARROW BACK CHAIRS
12 Pages
-
UPHOLSTERY
4 Pages
-
Sprirt 3300
4 Pages
-
NX3
2 Pages
-
NTI Diamonds
1 Pages
-
Demi Ultra
3 Pages
-
elements e-motion
2 Pages
-
Optibond-eXTRa-Universal
4 Pages
-
KaVo OP3D Pro
20 Pages
-
OP2D
8 Pages
-
ORTHOPANTOMOGRAPH OP 3D
7 Pages
-
OP200 D
9 Pages
-
KaVo FOCUS Product Brochure
6 Pages
-
DIGORA Optime Product
6 Pages
-
Invivo5.4 Upgrade
4 Pages
-
Kerr Rotary Digital Catalog 2018
129 Pages
-
The KaVo Advantage Collections
36 Pages
-
Prevention according to Kerr
72 Pages
-
KaVo SMARTmatic
8 Pages
-
Catalogue---2016
48 Pages
-
TempBond
2 Pages
-
X-Ray-Holders
144 Pages
-
PROGLOSS™
2 Pages
-
PerfectPearl™
2 Pages
-
KaVoESTETICAE70_E80
28 Pages
-
X-Ray Aprons
2 Pages
-
Kerr Product Catalogue
166 Pages
-
Burs catalogue
28 Pages
-
Ultra-Waxer 2
2 Pages
-
Demi Plus
4 Pages