Temperature Calibration Devices D R Y B L O C K , L I Q U I D B AT H , A N D T E M P E R AT U R E S TA N D A R D S

Temperature Calibration Devices | 2 Calibrator Overview Kaye has a full line of calibrators that can fit nearly any application in the pharmaceutical or biotech setting. Our dry block calibrators, liquid baths, and IRTD temperature standards provide the most precise accuracy on the market, guaranteeing that you can rely on Kaye’s trusted instruments. For the past 65+ years, professionals across the world have trusted Kaye products to deliver the most accurate measurements that are also traceable and secure. So, when you need to calibrate your thermocouples, wireless data loggers, or even verify...

Temperature Calibration Devices | 3 Liquid Nitrogen Comparator PERFECT DEVICE FOR EASY TEMPERATURE CALIBRATIONS AT -196°C The Kaye Liquid Nitrogen (LN2) Comparator is a device specifically designed to address the calibration needs for extreme cold temperatures. With the ability to calibrate up to 48 sensors at a time, it addresses capacity and flexibility needs for thermal calibration at cryogenic temperatures. It makes the calibration process much more reliable and secure compared to other methods used in the industry. It is often used in combination with other Kaye baths like the LTR-90, so...

Temperature Calibration Devices | 4 Typical Heat-Up Time Typical Cool-Down Time Access Opening / Well configuration Interchangeable Insert 0 30 mm (0 1.18 in) 160 mm depth (6.3 in) Interchangeable Insert 0 60 mm (0 2.36 in) 170 mm depth (6.7 in) Interchangeable Insert 0 27.7 mm (0 1.09 in) 136 mm depth (5.35 in) Interchangeable Insert 0 60 mm (0 2.36 in) 170 mm depth (6.7 in) Approx. 350 watts Approx. 375 watts Approx. 550 watts Approx. 1,000 watts

Temperature Calibration Devices | 5 The Kaye LTR-90 is an ultra-cool dry well calibrator designed for portability and ease of operation. Operating from -90°C to +140°C, it delivers fast response, high stability, and automated sensor calibration for ultra-low temperature applications. • Stirling cooler technology: reaches -90°C in 80 minutes • Axial uniformity of ±0.05°C across the full range • Software interface with Kaye Validator for automatic sensor calibration utility • Custom block design to accommodate 1 reference probe (IRTD) and 25 thermocouples or sensors • Rubber insulator cap to prevent...

Temperature Calibration Devices | 6 Insert Part Number: 410-3031 Insert Part Number: 410-3033 Insert Part Number: 410-3034 Insert Part Number: 410-3035 Insert Part Number: 410-3036 Insert Part Number: 410-3037 Insert Part Number: 410-3054 Insert Part Number: 410-3052 Insert Part Number: 41

Temperature Calibration Devices | 7 Insert Part Number: 410-3031 Insert Part Number: 410-3033-H Insert Part Number: 410-3034-H Insert Part Number: 410-3035-H Insert Part Number: 410-3036-H Insert Part Number: 410-3037-H Shipping Cases SAFE STORAGE AND TRANSPORTATION FOR YOUR KAYE EQUIPMENT Features & benefits ∙ Robust, secure, and practical, with shock protection during transport ∙ Can be used as a trolley for easy transportation ∙ Provides safety during shipments and internal transportation ∙ Safe shipment and transport for annual service ∙ Specific storage inserts for all accessories / documentation...

Temperature Calibration Devices | 8 Typical Heat-Up Time Typical Cool-Down Time 140°C to 25°C: 45 min 25°C to -40°C: 110 min 25°C to -80°C: 120 min Access Opening / Well configuration Max number of rigid 10 16 3 ValProbe loggers Additional fixtures available for: • CTR-40 - can hold up to 20 freeze dryer loggers

Temperature Calibration Devices | 9 The CTR-25 was designed to address portability, capacity, speed, and accuracy requirements not normally found in competitive liquid baths. The CTR-25 is ideally suited for verifications of up to 10 Kaye ValProbe or ValProbe RT Loggers, as well as various-sized process sensors. • Firmware supports automatic/manual verifications of ValProbe loggers • Compressor-free unit - operates with modern Peltier technology • Stainless steel casing withstands harsh sterilizing chemicals • Large front panel display with intuitive controls • Large 2.5L tank with up to 6” (15.24cm)...

Temperature Calibration Devices | 10 HIGH-ACCURACY TRACEABLE TEMPERATURE STANDARD -196°C TO 420°C During sensor calibration/verification, sensors are compared against the IRTD, and offsets are automatically calculated and stored. The broad temperature range from -196°C to 420°C enables it to be used in virtually all temperature validation applications. Features & benefits • Accuracy over range ±0.025°C • Sensor element: 200 Ohm Platinum sensor • Sheath material: Inconel™ 600 • Calibration traceable to NIST or PTB • Ambient temperature range: 0 to 60°C (32 to 140°F) Every Kaye IRTD is factory...

Temperature Calibration Devices | 11 For independent applications in calibration laboratories, the IRTD Win Console Software can be used to communicate with up to 2 IRTDs at the same time. It’s a convenient interface enabling you to track probe stability, numerically and graphically, log data to a file, compare IRTDs, and much more. The software's flexibility permits use with both standard PCs and touch screens. • State-of-the-art look and feel • Easy-to-use touch screen • Accepts IRTD cable of Validator 2000 and Validator AVS The Kaye IRTD touchscreen display is a standalone unit designed to...

Kaye representative contact: www.kayeinstruments.com/en/contact Request a demo: www.kayeinstruments.com/en/demo EUROPE, MIDDLE EAST, AFRICA AND ASIA Amphenol Advanced Sensors Germany GmbH Sinsheimer Strasse 6 D-75179 Pforzheim T: +49 (0) 7231-14 335 0 F: +49 (0) 7231-14335 29 Email: [email protected] www.kayeinstruments.com Visit our website: www.kayeinstruments.com USA / AMERICAS Amphenol Thermometrics, Inc. 967 Windfall Road St. Marys, PA 15857 T: +1(814) 834-9140 F: +1(814) 781-7969 Email: [email protected] www.kayeinstruments.com INDIA Amphenol Interconnect India Pvt Ltd....