1. Catalogs
  2. Kementec
  3. TMB Ease- Instructions & Specifications
video corpo

TMB Ease- Instructions & Specifications
1 /1Page

TMB Ease- Instructions & Specifications

TMB Ease- Instructions & Specifications
1 /1Page

Catalog excerpts

TMB Ease- Instructions & Specifications-1

TMB EASE ELISA HRP Substrate Cat. no. 5320 Product Characteristics TMB (3, 3', 5, 5'-tetramethylbenzidine) is a chromogenic substrate for Horseradish Peroxidase (HRP). TMB produces a deep blue color during the enzymatic degradation of hydrogen peroxide by HRP, and the addition of a stop solution gives a clear yellow color that absorbs at 450nm. TMB EASE is a ready-to-use and stable aqueous formulation. This substrate gives a slow assay reaction and is highly suitable for the direct switch from OPD (ortho-phenylenediamine dichloride) based assays. It does not contain NMP (1-methyl-2pyrrolidone) making it REACH Restricted Substances List Annex XVII compliant, while ensuring maximal safety during use, and minimal waste problems after use. Composition & Properties Ready-to-use substrate: Includes substrate buffer and hydrogen peroxide. No other reagents should be added. Tips & Tricks • If reduced intensity is required, it is recommended to shorten the time of development or to dilute the conjugate/antibody in the immunoassay further. • Dilution of the substrate is not recommended. However, if required, contact Kementec. • In case of incidents of precipitation with very high OD-values, we can recommend the use of the TMB X-tnd (cat. no. 5280). Handling & Storage • Store solution at 2-8 °C in the dark. • Avoid exposure to light, heat and contamination with metal ions or peroxidase. • Re-dispense only into bottles made of High Density Polyethylene (HDPE), amber color. • Dispensing guidelines are available upon request. Working Procedure 1. The desired amount of substrate is poured into a sealed container and allowed to reach room temperature in the dark before use. 2. A recommended volume of 100 µl substrate solution per microtiter well is added. Time of development is typically 5-30 minutes. Keep the plate in the dark during incubation. 3. In kinetic assays, the blue color is read directly at 650 nm. For endpoint assays 100 µl (equal volumes) of 0.20 M sulphuric acid is added and the absorbance is read at 450/620 nm. The yellow solution is stable for at l

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.