Motion Sensing Luminaires For Stairwells And Other Public Spaces High Abuse Occupancy Sensor Lighting Products

2 Energy Saving Solutions – Occupancy Sensor Lighting Products As maintenance and operational expenses escalate, facility managers and building owners are continuously challenged to find ways of reducing costs by controlling energy. Public and vehicular traffic areas must have adequate light levels for proper safety and ingress/egress. Lighting in intermittently occupied areas, when properly controlled, poses the greatest potential for cost savings without sacrificing safety or performance. Many states have enacted energy saving code requirements that mandate the use of occupancy control for...

Installation Guide Energy saving solution products from Kenall are perfect in enclosed stairwells, corridors, entry and exit points and parking garages. To maximize energy savings, special attention should be given to luminaire location in relation to unintended objects that could trigger a false fixture activation such as windows, nearby moving plants, pedestrians or traffic passing by (see illustrations below). Recommended application Good applications No exterior windows in corridors or stairwells that nearby pedestrian or vehicular traffic may cause a false triggering of the fixture. An enclosed...

Sensor Features Flexible Functionality The FM-105 sensor coverage pattern is omnidirectional. Depending on the installation, it can be adjusted to detect occupancy up to 20 feet away. The sensor is installed inside the luminaire so that it is completely hidden from direct view. Its integrated daylight sensitivity adjusts from 2 to 200 footcandles and its time delay may be set from 10 seconds to 30 minutes. The sensor operates at 120 or 277 VAC and utilizes SHF technology to control lighting based on occupancy. It sends out electromagnetic waves that bounce off nearby surfaces and uses the Doppler...

Occupancy Sensor Lighting Products The following Architectural High Abuse and Rough Service products are available with an intergral occupancy sensor. For complete product specifications, go to www.kenall.com. For applications that call for custom products, please contact our Applications Department at 800-4-Kenall. EnviroSeal™ Nominal 5"x 48" ES548MS Series with occupancy sensor Ceiling/Wall Mount Lamps: T5, T8 Nova II™ Nominal 10"x 48" N1048MS Series (7200) with occupancy sensor Ceiling Mount Lamps: Biax, T5, T8 Millenium Stretch™ Nominal 12"x 24" MLHA1224MS Series with occupancy sensor Individual...

1020 Lakeside Drive Gurnee, illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com ©2011 Kenall Mfg. Co. All rights reserved. L10035-030811