PROJECT INFORMATION MEDMASTER™ DOWNLIGHTS Patient Room Luminaires Job Name Fixture Type Catalog Number PRODUCT FEATURES: »» Recessed ceiling mount; 6" & 8" aperture, vertical and horizontal fluorescent »» IP65 rated for cleaning protocols required in healthcare applications »» Antimicrobial finish standard on exposed painted trim »» Flush lens for ease of cleanability SPECIFICATIONS HOUSING: .050" aluminum. Fully enclosed and sealed. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. REFLECTOR: Aluminum with clear specular low iridescent anodized finish. See Ordering Information for other finishes. TRIM: 6" Aperture: 18-gauge CRS. 8" Aperture: 16-gauge CRS. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish standard. Trim secured to housing with captive flush mounted Phillips-head stainless steel fasteners. See Ordering Information for other materials/finishes. LENS: Sealed to trim with continuous lens retention system. Lens orientation, smooth side out. ELECTRICAL: Fluorescent electronic 120/277/347V ballasts high power factor (<10% THD). See ordering information for optional equipment. INSTALLATION: Adjustable mounting brackets for use with conduit or c-channel (by others). PHOTOMETRICS: Efficiency of MDL8VF-1-32P-RS-DV-2FW-PAH-CS-G = 59%; S/MH = 1.2,1.2. Efficiency of MDL6VF-1-32P-RS-DV-2FW-PAH-CS-G = 52%; S/MH = 1.1,1.1. Efficiency of MDL8HF-1-42P-DV-2FW-PAH-CS-G = 69.4%; S/MH = 1.4,1.2. Efficiency of MDL6HF-1-32P-DV-2FW-PAH-CS-G = 58.9%; S/MH = 1.3,1.3. For photometric information, go to www.kenall.com. LISTINGS: UL and CUL Listed for through branch circuit wiring. UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. CCEA Approved. IC Rated (32 System watts maximum). IP65 CCEA Approved ORDERING INFORMATION (Ex: MDL6HF-1-32P-RS-120-DCFB-PAH-CS-T) Model Lamp Qty/Type Ballast Type Reflector Finish Lens Type 6" Aperture Vertical 8" Aperture Vertical 6" Aperture Horizontal 8" Aperture Horizontal Lamp Quantity/Type Vertical Lamps 1-13Q • One 13 Watt Quad (6"only) 1-18Q One 18 Watt Quad 1-26Q One 26 Watt Quad 1-18P One 18 Watt PLT 1-26P One 26 Watt PLT 1-32P One 32 Watt PLT 1-42P One 42 Watt PLT • n/a with DM7 or DM10 ballast Note: 6"Aperture fixtures IC rated; on maximum 32 system watts. Horizontal Lamps 1-13Q• One 13 Watt Quad (6" only) 2-13Q• Two 13 Watt Quads (6" only) 1-18Q One 18 Watt Quad 2-18Q Two 18 Watt Quads 1-26Q One 26 Watt Quad 2-26Q Two 26 Watt Quads 1-18P One 18 Watt PLT 2-18P Two 18 Watt PLT (8" only) 1-26P One 26 Watt PLT 2-26P Two 26 Watt PLT (8" only) 1-32P One 32 Watt PLT 1-42P One 42 Watt PLT Voltage 120 120 Volts (DM10 only) 277 277 Volts (DM10 only) DV 120-277 Volts 347 347 Volts (n/a with DM7 or DM10 ballast) Trim DCFW*† Die-Cast Aluminum Flat White DCFB*† Die-Cast Aluminum Flat Black 2FW*† CRS Flat White 2FB*† CRS Flat Black PAFW*† Aluminum Flat White PAFB*† Aluminum Flat Black 5BR* Type 304 SS Brushed 5FW*† Type 304 SS Flat White Ballast Type 5FB*† Type 304 SS Flat Black RS Rapid Start Electronic <10% THD DM7 Low Voltage Electronic Dimming Ballast 2FCC* CRS Custom Color (Consult Factory) DM10 Line Voltage Electronic Dimming Ballast 5FCC* Type 304 SS Custom Color (Consult Factory) PACC* Painted Aluminum Custom Color (must specify 120V or 277V) *6" trim uses 18-Ga (CRS/Type 304 SS) or .050"(Aluminum) materials SB Specified Ballast *8" trim uses 16-Ga (CRS/Type 304 SS) or .063" (Aluminum) materials Housing PAH .050" Painted Aluminum Reflector Finish CS Clear Specular (STD) CSS Clear Semi-Specular CG Champagne Gold Lens Type Acrylic U .125" #12 Prismatic High Impact T .125" Clear High Impact UV UV Filtering (Specify) Polycarbonate 2 .125" #12 Prismatic G .125" Clear Specified Lens SL Specified Lens Options EL Standard Lumen EL Pack PEL High Lumen EL Pack BB Black Baffle FS Fuse & Holder WW Single Wallwash † Antimicrobial finish 1020 Lakeside Drive Gurnee, Illinois 60031 When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.

For additional photometry, go to www.kenall.com MEDMASTER™ DOWNLIGHTS Patient Room Luminaires MDL SERIES – CFL DIMENSIONAL DATA CROSS SECTION - VERTICAL CROSS SECTION - HORIZONTAL BOTTOM VIEW RECOMMENDED CEILING CUTOUT: 6" Aperture 8" Aperture 1020 Lakeside Drive Gurnee, Illinois 60031 When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents...