LED lighting for MRI imaging suites

Letter from the President kenall's quality commitment Kenall is dedicated to solving the most difficult lighting challenges faced by healthcare design and facilities professionals. One such challenge is the magnetic imaging or the MRI suite. Kenall MRI Product Warranty When installed properly, Kenall's MRI luminaires are warranted to be free of defects in workmanship and materials for a period of one year from the date of invoice. The DC power supply contained in the external power supply carries a five-year warranty from the date of invoice. MRI systems utilize powerful magnets capable of propelling...

MedMaster™ LED Products for MRI Imaging Suites All Kenall MRI lighting systems are patent pending. MEDMASTER Envela® SEALED ARCHITECTURAL REGRESSED AND FLUSH LENSED DOWNLIGHTS The new Envela Series incorporates an aesthetically pleasing regressed lens into a high performance, sealed unit without external doors or fasteners. A flush lens version is also available. The downlights are available in a 6-inch aperture with dimmable LED and feature a smooth, die-cast trim ring with a choice of reflector finishes. MRIRDL – MRI Imaging Suite Regressed Downlight MRIDL – MRI Imaging Suite Downlight with...

MRI Suite Configuration – Plan View Scenic Dimming Control Control Room (Non-Shielded MRI Installation) Shielded IMAGING Room CLOSED MRI Lighting for the control room of MRI/imaging suites requires the combination of even ambient and non-glare task illumination with the added flexibility of dimmable control. Providing for patient comfort during imaging procedures is achieved with gentle ambient illumination and decorative sconces along with the calming effects of beautiful graphic image lightboxes. Email: [email protected] 1020 Lakeside Drive Gurnee, Illinois 60031 The Kenall product shown on this...

RF Filter MRI Power Supply (MRIPS-312) Dimming RF Filters 0-10V Optional Scenic Dimming Shielded IMAGING Room OPEN MRI Equipment Room (NON-SHIELDED INSTALLATION) Ambient illumination can also be achieved from a variety of light sources where light levels can be adjusted through conventional dimming or through sophisticated control systems. All line voltage and 24-volt DC power supplies, RF filtering and dimming control systems are located in an adjacent equipment room with general illumination. Email: [email protected] 1020 Lakeside Drive Gurnee, Illinois 60031 The Kenall product shown on this...

MedMaster Envela® Ambient Ceiling fixture MRI/imaging rooms require soft, ambient dimmable illumination in order to maintain a calm, comforting environment for patients. Low brightness with soft light distribution is ideal for patients undergoing scan procedures, especially children. The Envela ambient fixture features a 24-watt, 3000K or 4000K high brightness, dimmable LED source with equivalent light output to a 32-watt CFL. Its high transmittance, frosted lens provides smooth, homogenous light levels for the imaging and control room areas of the MRI suite. The new MedMaster Envela ambient...

MedMaster Envela® Product Features Patented, fully gasketed, sealed optical chamber Extruded low-glare frost lens (high light transmittance) Door-less design with tool-less access for maintenance One-piece seam-welded aluminum reflector with 94% reflectance polyester powder finish Optional clear DR acrylic lens with internal perforation One-piece seam welded aluminum housing construction for strength and durability • Requires 24-volt DC (120-240V AC) remote-mounted, high-power factor power supply (page 23) • 5%-100% dimming range capable • Certified to UL 1598 and UL 8750 standards • NSF2 Splash...

MedMaster Auracyl™ Sconce Creating a comforting and pleasing environment is the goal of lighting specifiers when designing MRI/imaging suites for healthcare facilities. Kenall’s MedMaster Auracyl Sconce (MRIMAS Series) provides attractive accent lighting with superior performance in critical surroundings. The Auracyl Sconce’s clean, simple lines and gentle curves complement a wide range of architectural and interior designs that can extend beyond MRI/imaging suites and into patient rooms, hallways, lobbies, atriums and other public spaces. This allows the designer to use the Auracyl as an element...

MedMaster Auracyl™ Product Features Non-ferrous, marine grade extruded aluminum housing with die-cast end caps. Antimicrobial finish available Die-formed non-ferrous marine grade aluminum reflector with 92% reflectivity Frosted, high transmittance extruded acrylic lens for maximum uniformity Sealed construction keeps out contaminants, dirt and liquid for infection control and facilitates cleaning • Requires 24-volt DC (120-240V AC) remote-mounted, high-power factor power supply (page 23) • NSF2 Splash and Non-Food Zone listed • 5%-100% dimming range capable • Optional IP64 certified in compliance...

Email: [email protected] 1020 Lakeside Drive Gurnee, Illinois 60031 The Kenall product shown on this page is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

MedMaster Auracyl™ Sconce Zone 1 Hallway or Entrance ComplEmentary applications Although the MedMaster MRI Product Specification Guide is devoted to luminaires for the MRI/imaging Room (Zone 4), matching, non-MRI configured fixtures are also available for any unshielded area within the suite (Zone 1 through 3). Zone 2 Patient Dressing/Holding Zone 3 Control Room Source: American College of Radiology Scalable accent lighting ease of installation and maintenance Available in 1', 2', 3', and 4' lengths, the Auracyl Sconce looks equally at home in MRI/imaging rooms, patient waiting rooms, dressing...

MedMaster Envela® Sealed Regressed Downlights Downlights are commonly used in MRI/imaging suites and must provide smooth, low-glare illumination for patient comfort. Kenall’s line of downlight luminaires offer a variety of options to meet the needs of these applications with a high performance, dimmable LED light source. The LED MedMaster Envela Regressed Downlight (MRIRDL Series) incorporates aesthetically pleasing, even illumination into a architectural-grade, sealed regressed lens unit that is perfect for MRI, imaging and control rooms. The Envela Regressed Downlight features a clear, semi-specular,...