MEDMASTER ENVELA® Patient Room Luminaires MEP SERIES PRODUCT FEATURES: » Switched ambient-exam (bi-level) illumination modes » Recessed ceiling mount - grid or flange; 2'x2' and 2'x4' » Stands up to rigorous cleaning protocols » Tool-less access for relamping and maintenance Fixture Type_ Catalog Number. Approved by_ PROJECT INFORMATION SPECIFICATIONS HOUSING: 20-gauge CRS. One-piece seam-welded construction. Black TGIC polyester powder coat - 5-stage pre-treatment. Salt spray test: 1,000 hours. HOUSING FLANGE: 18-gauge CRS, standard 4-piece construction, spot-welded to housing. Mitered and welded corners. REFLECTOR/LENS ASSEMBLY: 20-gauge CRS with one-piece appearance. Matte white TGIC polyester powder coat finish - 5-stage pre-treatment. Salt spray test: 1,000 hours. Tool-free lamp access. INTERNAL REFLECTOR: Luminaires with 4 (2/2) lamps are provided with specular aluminum reflector. Luminaires with 3 lamps are provided with white high-reflectance low-gloss TGIC polyester powder coat finish. LAMP SHIELDING: Fully gasketed, sealed luminous shield of impact resistant DR acrylic. See Ordering Information for lens options. ELECTRICAL: Two (2) line-voltage wall (supplied by others) control driver/ballast output (0%/50%/100%) for ambient-exam lighting modes. LED: Serviceable mid-power LED array. Available 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, optional 0-10V dimming constant current driver. (<20% THD, >0.95 PF). EMC meets FCC Part 15, Class A limits. Linear Fluorescent: Electronic 120, 277 or 347V ballasts (<10% THD, >0.90 PF). Fluorescent lamps by others. See Ordering Information for optional equipment. INSTALLATION: Grid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit. PHOTOMETRICS: Photometry tested to IESNA LM-79-08 test procedure. For additional photometric data, please go to www.kenall.com WARRANTY: Limited five (5) year warranty. LISTINGS: UL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone. LED ORDERING INFORMATION (Ex: MEP22-G-3-24-RS-2-120-FA) Model Mounting Options Lamp Type Ballast/Driver Ballast/Driver Qty Voltage Lens Type Options Lamp Type 2x2' 3-24 Three F24T5HO 2-17-2-24 Two F17T8 and Two T24T5HO 2'x4' 90L35K 90 Watt 3500K LED 3-54 Three F54T5HO 2-32-2-54 Two F32T8 and Two T54T5HO Ballast/Driver Type DCC Dimming Constant Current RS Rapid Start Electronic <10% THD SB Specified Ballast Ballast/Driver Quantity 1 One Circuit (LED only) 347 347 Volts (n/a with 2x2) (Consult Factory) DV 120-277 Volts Lens Type FA Frosted DR Acrylic CAP Clear DR Acrylic with Perforated Insert Options AMF Antimicrobial Low-Gloss White on exposed surfaces of Reflector/Lens Frame ELA^ One-Lamp Emergency Battery Pack (32°F) FS Fuse & Holder (1 per ballast) LVC*A Low Voltage Controller (See Technical Sheet or consult factory for switching options) RFA Radio Frequency Filter (1 per ballast) TNA Night Light An/a with 347V •n/a with LED Lamp Type *For use with pillow switches www.kenall.com P: 800-4-Kenall F: 262-891-9701 10200 55th Street Kenosha, Wisconsin 53144 When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.

For additional photometry, go to www.kenall.com MEDMASTER ENVELA® Patient Room Luminaires MEP SERIES PERFORMANCE Displayed information is for selected luminaires only. Additional wattages and color temperatures are also available. Visit www.kenall.com for additional information. Model: MEP24-G-90L40K-DCC-DV-FA Maximum Candela = 3768 Located At Horizontal Angle = 15, Vertical Angle = 5 - 1 - Vertical Plane Through Horizontal Angles (15-195) (Through Max. Cd.) -2 - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.) Recommended Ceiling Cut-Out 24.50x24.50 (Flange fixtures) Recommended...