Lower body table shields brochure
28Pages

X-ray table mounted shields Specifications & ordering information Issue 3

Tableside mounted shields Key features Shield configurations 78 cm wide 92 cm wide 100 cm wide 114 cm wide 137 cm wide 162 cm wide Collision resilient shield configurations 92 cm wide 114 cm wide 137 cm wide 162 cm wide Top shield options Top shield compatibility Table shielding storage Wall mounted Mobile

Tableside mounted shields Kenex lower body shields substantially reduce exposure to scatter radiation emanating from the table or patient’s body. The shields consist of a lightweight and durable structure with an enhanced double friction joint or single friction pivot, and pivotal arm supporting a flexible 0.5 mm lead equivalent curtain. Optional semi-flexible top shields provide additional protection to the upper body. • All shields easily mount to either side of the table allowing the pivotal arm to always face the head end. • The suspended curtain forms a single ‘safe zone of occupancy’...

Tableside mounted shields Key features Unique set-up process All models can be easily and quickly attached to either the right or left side of a table and can be switched from one side to the other if required. Rail width adjustment All shields can be securely attached to the tableside rail. They can be configured on-site to fit either a 25 mm or 28.6 mm high tableside rail (max. 11 mm depth). Other rail sizes can be accommodated via special order. Integrated rail for equipment controls All 100 cm wide shields and larger, are supplied with two integrated accessory rails (10 x 25 mm fitted,...

Collision resistant Some shields (see page 10 - 13) are fitted with a patented device enabling upward movement of the pivotal arm. Some acute C-Arm angulations can mean potential or actual collision with a table mounted shield. The collision resistant link ensures neither the C-Arm nor shield sustains damage, and that medical procedures are not interrupted. These shields are fitted with two separate curtains, manufactured with overlapping angled sides as shown. This feature helps maintain protection during upward movement of the pivotal arm. Upward force Shown with curtains removed Curtain...

Tableside mounted shields Shield configurations The Kenex range of lower body protection detailed in this document range from 78 cm to 162 cm wide. Each is supplied with a 0.5 mm Pb flexible protective curtain. Top shields help extend protection and are either included with a product or can be purchased separately (see page 16 for compatibility). 78 cm wide protective shields Consists of: • 78 cm wide x 70 cm high curtain panel (option available for three overlapping curtain panels). • Top shields are included with some products, for additional options see page 16 for compatibility. Curtain...

92 cm wide protective shields Consists of: • 92 cm wide x 70 cm high curtain panel (option available for three overlapping curtain panels). • Top shields are included with some products, for additional options see page 16 for compatibility. Curtain panel 92 cm wide Product code three overlapping 312/E-010 312/E-010/P 312/E-011 312/E-011/P 312/E-012 312/E-012/P Additional tops are available, see page 16 for compatibility Kenex | Lower body table shields & ordering information | Issue 3

100 cm wide protective shields Consists of: • 100 cm wide x 70 cm high curtain panel (option available for three overlapping curtain panels). • Two 35 cm long integrated accesory rails, 10 x 25 mm (fitted) 9.5 x 28.6 mm (supplied). Option for one 7.7 x 25 x 350 mm rail (fitted). • Top shields are included with some products, for additional options see page 16 for compatibility. Curtain panel 35 cm long integrated accessory rail 100 cm wide Product code three overlapping Kenex | Lower body table shields & ordering information | Issue 3

114 cm wide protective shields Consists of: • 114 cm wide x 70 cm high curtain panel (option available for three overlapping curtain panels). • Two 35 cm long integrated accesory rails, 10 x 25 mm (fitted) 9.5 x 28.6 mm (supplied). Option for one 7.7 x 25 x 350 mm rail (fitted). • Top shields are included with some products, for additional options see page 16 for compatibility. Curtain panel 114 cm wide Product code three overlapping 35 cm long integrated accessory rail 10 x 25 mm (fitted) 9.5 x 28.6 mm (supplied) Kenex | Lower body table shields & ordering information | Issue 3

137 cm wide protective shields Consists of: • 137 cm wide x 75 cm high curtain panel. • Two 57 cm long integrated accesory rails, 10 x 25 mm (fitted) 9.5 x 28.6 mm (supplied). • Top shields are included with some products, for additional options see page 16 for compatibility. Curtain panel 57 cm integrated accessory rail 137 cm wide Product code 312/DS-039/4 312/DS-039/4/3 312/DS-0412/4 Additional tops are available, see page 16 for compatibility Kenex | Lower body table shields & ordering information | Issue 3

162 cm wide protective shields Consists of: • 162 cm wide x 75 cm high curtain panel. • Two 57 cm long integrated accesory rails, 10 x 25 mm (fitted) 9.5 x 28.6 mm (supplied). • Top shields are included with some products, for additional options see page 16 for compatibility. Curtain panel 57 cm integrated accessory rail 137 cm wide Product code Additional tops are available, see page 16 for compatibility Kenex | Lower body table shields & ordering information | Issue 3

Tableside mounted shields Collision resilient shield configurations Collision resilient lower body shields have a unique patented mechanism that enables the pivotal arm to move up when in collision with C-arm equipment. Each is supplied with a 0.5 mm Pb protective lead curtain. Top shields help extend protection and are either included or can be purchased separately, see page 16 for compatibility. 92 cm wide collision resilient protective shields Consists of: • 92 cm wide x 70 cm high curtain panel, 312/DS-008 & 312/DS-008/3 are 75 cm high (option available for three overlapping curtain...