Kenyon Chambers and Coldrooms Panel Specifications

Kenyon Chambers and Coldrooms are constructed using insulated panels available in two thickness options: ISO 8 panels with 80mm thickness and ISO 6 panels with 60mm thickness. The provided diagrams and measurements are based on the ISO 8 panel specifications. For chambers or coldrooms using ISO 6 panels, it is necessary to subtract 20mm from each panel measurement to account for the reduced thickness.

Panel Dimensions and Model References

The document lists various model codes such as KBC21SD, KBC2LD, KBC2iC, KBC2iD, KBC3iD, KBC6iDB, KBC99iD, KBC93SD, KBC6iD, KBC62SD, KBC6S3i, KBC3SD, KBC4iD, KBC4SD, and KBC42SD. These models correspond to different chamber or coldroom configurations.

Key dimensional values repeatedly mentioned include panel widths and heights such as 650mm, 1060mm, 1960mm, 2200mm, 2440mm, 2560mm, 2860mm, and thicknesses of 60mm or 80mm depending on panel type. These dimensions likely represent standard panel sizes or chamber internal/external measurements.

Critical Notes and Recommendations

• When using ISO 6 panels (60mm thick), deduct 20mm from each panel measurement shown in the diagrams based on ISO 8 panels.
• Model codes are associated with specific panel sizes and configurations, which should be referenced when selecting or assembling chambers.
• The document emphasizes the importance of accurate dimension adjustments to ensure proper fit and insulation performance.

Summary

This technical document provides essential specifications for Kenyon Chambers and Coldrooms, focusing on panel thickness options and corresponding dimensional adjustments. It serves as a guideline for selecting appropriate panel sizes and understanding the impact of panel thickness on overall chamber dimensions.