Function Control Module (Relay) ZKRUNCIPRMLK100 Enables on/off control for two different functions within the room (such as reading lamp or window blinds) from the patient handset. One Function Control Module must be installed per Patient Handset, connected between the Room Control Unit and the Bedside Call Unit via its two RJ45 ports (in/out), or connected to a Call Unit port on the Room Control Unit by itself. The lamps take orders from the Room Control Unit so they must be assigned to the handset which will give them orders. This process takes place after the Call Units are given addresses. 1. Data Out 2. Data In 3. Config Button 4. Status LED Room Light or Bed Light Energy Cable Function Control Module Energy Cable Energy Cable Room Light or Bed Light to Room Control Unit Energy Cable Technical Specification ZKRUNCIPRMLK100 Weight Operating Temperature / Humidity Supported Light Control Types